BMW 525 polishing and waxing_Maintainance, Maintainance

BMW 525 polishing and waxing

July 30, 2024

The paint finish of the whole vehicle is not very bad. Most of them are miscellaneous lines caused by car washing. In addition, there are not many fine washing methods usually, which leads to a lot of dirt hidden in many side seams and dead corners, and it took a lot of time to deal with it. This time, waxing was chosen to apply a layer of protection to the surface of the car paint to reduce the adhesion of dust and air pollutants, and to increase the brightness of the paint surface. Regular waxing has become a habit.

When vehicles enter, check the local vehicle conditions first.

While waiting for the wheel hub to cool down, the interior is cleaned first, and then the PA pre-wash the body.

The function of the pre-washing liquid is to decompose the sand and attachments on the surface of the paint surface, leave the paint surface under the action of gravity, and then clean the paint surface to greatly reduce the occurrence of miscellaneous lines.

After cleaning the paint surface, it is washed with water, then the edge joints are cleaned, then the iron powder and asphalt are removed from the body.

Remove the clay to remove the oxide layer on the body surface.

Masking tape is used to cover it to avoid damaging other parts during the polishing process.

After polishing, the entire car is degreased to remove abrasive residues and allow the paint to better absorb wax. After degreasing is completed, waxing is followed.