F18- 535li Roof renovation, elderly car…_Maintainance, Maintainance

F18- 535li Roof renovation, elderly car…

July 31, 2024

The 2011 model 535 Luxury was launched in November 2010. It currently has 170,000 + kilometers. It will be 12 years old in November this year. I am a patient with OCD but has advanced laziness cancer. Last year, I made up my mind to replace all the aging parts that needed to be replaced. After nearly half a month, I found that the rebound strength of the front suspension was not enough while driving. I defeated the laziness cancer again to clean it up, but later found that it was still not ideal. There will be a “squeaking” sound from the front when you cross the speed bump or potholes. Now I can only endure it and fix it again when the time comes, and replace it with original parts. I went back to my hometown during the Qingming Festival to worship my ancestors. On April 8, I went back to Guangzhou on the road to the service area to change my old watch and drove in the back seat to go to bed. I accidentally looked up and saw that Barbie Q was gone, and the tarpaulin on the top of the two seats in the back seat had collapsed. There were only two positions. The area is not large, but I feel uncomfortable and obsessive. If you ignore one side and another side, you will become a broken car sooner or later. I can’t stand it anymore. With the mentality of solving problems in time, let’s do it!

I had nothing to do, and when I saw asphalt cleaning agent, I pulled off the tail tag. I had long wanted to pull off…

The first car was parked clean, and the second car was also parked clean. Maybe I kept it to make sure that I was 3.0, but then I slowly ignored it…

The bottom is clean and crisp, and it looks very comfortable.

I don’t feel sorry when I tear it down! Raising it requires experience

As long as you can take care of it, you can ignore it.

Just rub the sponge and it’s like this. It’s a little disgusting?

Touch it with your fingers and it’s like this

Brush all the first process thoroughly

Then sprinkle with powder a second time and carefully brush off residual sponge

The last process is to use a steel wire ball to completely clean up

Start spraying glue after cleaning

The boss did it himself the whole time and was quite relieved

This is a skylight. I also built it together.

I sprayed the ceiling board once, and now I also sprayed the tarpaulin

Spray all evenly

I started using sponge as a tool to bond. The boss said I couldn’t use a hard scraper or something, but I didn’t dare to ask. It looked quite comfortable anyway.