The Spring Festival is coming soon, and we still have to add something new to Xiao Wu to protect it before the new year. Taking advantage of the good weather these two days, I installed a set of big surrounding floor mats for Xiao Wu. Those who will not install large surrounding floor mats can also have a look, and you will know how to install them.

Dangdang, this is today's protagonist, spent a lot of ocean to buy a set of large surround floor mats.

Unpacking ~ unpacking ~

Take it out and take a few pictures first. I still like brown very much. It looks very classy. The weight of things is not light, and it is still difficult to install.

Upper and lower two layers of large surrounding foot mats, now the mainstream foot mats are of this kind, the protection effect is good, the silk ring cushion is not very thick, elasticity is still there, coupled with the thickness of leather, very soft feeling.

The bottom of the honeycomb, and there are many buckles on the edge, mainly play a fixed and stereotyped role, the foot pad is not fixed that is no joke, the pad must be bought can be fixed, or the kind of anti-skid effect.

Then there is the loading part. I just tried to install it together with a silk ring, but it didn't work. Later, it was easier to separate the silk ring from the leather cushion, but it was also possible to install it.

After loading the leather alone, the effect is like this: to deal with the position of the throttle pedal, slowly adjust yourself to a position that is not stuck, leaving more space, otherwise the throttle is too close to the leather next to it. You have to debug and fix this for a long time.

The buckle is fortified to the gap in the suede surface, and a good position of the card is almost enough.

Finally, spread the silk ring, fix the wire ring at the position of the buckle, and the position of a cab is complete.

After the installation, you can just sort it out a little bit, but it's not difficult to say it's difficult, but it's easy to pretend it's easy.

The effect shows that the side surround is very high, which well protects the velvet surface of the original car, and the daily care of what part of the silk ring is removed and cleaned, and the leather does not care about him.

Try the effect of absorbing water, the water will only remain on the upper loop and will not infiltrate the lower part of the leather. For daily use, there is only water on rainy days, and it is easy to deal with it. Just take it down and shake it down for a few times. It is still very simple and convenient.

Finally, the back row, this is not installed on the original car velvet, this velvet is too delicate, dirty, not easy to wash, wet, not easy to dry, can only go to the store to do.

Then move the last row, this is also the most difficult to install, but the silk ring and leather are packed separately, it will be much lighter. After putting it on, all you need to do is to hold the card QQ, buckle it, and sort it out. It is quite simple to say, but there are still a lot of steps to operate.

All the buckles should be stuffed into the suede gap, and the leather fortress near the back seat will be stuck under the seat.

Arrange the position of the middle bridge.

Finally, the effect of the installation is finished.

The installation effect is completed, the position of the tuyere is not blocked, and the reserved opening of the track is also very accurate.

It took about an hour to install the whole foot mat, but the big encirclement is still very difficult to install, and those who do not have strong hands-on ability should go to the car shop to find someone to install it. Before, they have also used the original factory and silk rings, which can be used directly as soon as they are put. It is simple and easy, but there is no big surround foot mat with such good protection effect and so good visual effect. All right. That's all for today's installation. Don't spray if you don't like it.