Small changes will really make you feel happy, install and replace Baohua Glowing yourself._Use car, Use car

Small changes will really make you feel happy, install and replace Baohua Glowing yourself.

August 16, 2024

The 525 of the 20 models has been slightly changed all the way. Limited literary talent. Friends will see.

I have been operating for a year. I have not been busy with work recently, so I installed Baohua myself. I especially like the glowing atmosphere and feel very comfortable. I bought all my tools, skipping work, airbags, drills, etc. Especially the back door, it was very difficult. I felt that I was particularly able to trouble and tired, but I was still very happy, so I remembered it with my sweat. Haha…

Let’s take a picture first. I really enjoy it in the car at night. The rear iPad is also installed by yourself. You can see my other modification cases.

This artifact is very powerful!! Removing a car door is very simple. BMW’s workmanship is still good. Friends who have removed other car doors understand.
1. Remove the handle of the rocker first and unscrew the 2 screws inside.
2. Tilt the bottom of the door panel with the rocker and insert the airbag into the door panel.
3. Just squeeze the airbag all the time. The airbag will bulge the door panel. Don’t hurt the car paint or the door panels.

The front door is simple, just replace it. The screws are tightened and the treble is replaced. I feel that the original car with 6 horns is the most suitable for changing to Baohua. Harman’s also need painting…

After the back door is opened in the same way, place it in the reserved speaker space. The wiring method can be connected to the rear platform and surround it, which makes the sound quality good.

Then there was the most difficult step, opening a hole in the back door, and I was really tired. The whole afternoon. My hands were numb, but the results were okay.
1. Drill the hole.
2. Cut out the horn position and remember not to cut it too big!!!
3,502 glue secures the sutures to prevent them from falling off.
4. After the speaker cover is installed, tighten the screws and remember to fix it with hot melt adhesive.

Difficult construction. The door panel is much thicker than expected…

Construction carefully, tired and happy.

Straight to the results. Very beautiful. I didn’t replace the door handle because it was more complicated, and the plastic workmanship was much worse than the original car. It didn’t shine anyway. To be honest, its glow was more important to me than sound quality.

Light up 6-piece set. After completion, the rear platform speakers were also replaced with Baohua. The center is not currently installed. I feel that the midrange can only be reflected after adding an amplifier. Many friends who are worried about abnormal noises don’t have to. None of my buckles are broken, and the construction is good after the sun shines in the summer. Lift up the airbag before removing it, and align it with the hole after installation. This is my own trick.
For other modification cases, you can see my other posts.