A collection of various abnormal noises and solutions for the New Five Series G38! Long-term update! (Xiao Ba car sticker 21)

  9
 August 17, 2024

Catalogue

  • Write at the front
  • Get to the point.
  • 1. The headrest in the driver’s seat vibrates (what I found)
  • 2. Copilot A-pillar abnormal noise (found by car friends and car owners)
  • 3. The driver’s seat opens the door creaking (what I found)
  • 4. Abnormal noise of skylight (found by car friends and friends)
  • 5. The copilot’s position is abnormal (at least most people have asked me)
  • 6. About the abnormal noise of the plastic parts (interior panels) of the whole car (almost everyone has found out)
  • 7. About whether the abnormal noise will occur after the refitted vehicle removes the interior panel and so on (my understanding)
  • Write at the end
  • The explanation of the picture and text that you like (don’t just look, give likes to the elder brother’s text ~ hey)

Write at the front

!!! This post is a shared post, friends with abnormal noise problems can share the abnormal noise location, abnormal noise scene, and solutions to me in the comment area. I will update this post at any time, and mark the ID of the car friends, indicating the source, so as to provide a platform for the majority of cyclists to share the problem!

~ I originally intended to input all the useful information left by all the riders into the post, but I found that the words will be reduced and changed by the system after pasting and copying, so I can only trouble you to turn over the building slowly. There are a lot of friends’ messages behind are very useful. More complete and more useful than I said, don’t miss it.

Start:
As I said before, I will find an opportunity to write a new collection of abnormal sounds found in the use of the 5-Series G38 (my own discovery and the materials provided by my friends) for your reference.
But there is a saying in front, that is, after many riders find a strange noise in the car, they must think that there is something wrong with the car, but I personally suggest that before you are in a hurry, check the position in the car where you think there is a strange noise. Whether you or other people have placed something prone to abnormal noise, I think if you do this well, at least 80% of the abnormal noise can be solved. For example, my copilot made a loud voice before. After looking for it for a long time, I found a sunglasses that my wife put there. If it wasn’t for fear of being ravaged, I would have wanted to get rid of it at that time, so, you know, put an end to this situation first.

Get to the point.

1. The headrest in the driver’s seat vibrates (what I found)

I first found out that when I was driving the highway alone, the copilot was empty, and I found that the copilot’s seat was so loud that the music could not be hidden, so I looked back and studied it from time to time.
It is found that under certain circumstances, such as when the highway is a bit curved or downhill, the co-driver’s headrest will vibrate frequently. I thought there was something wrong with the headrest I bought, so I took the pillow, and as a result, the vibration was even more enjoyable. I can’t solve the problem by adjusting the angle of the head pillow before and after eating expired Viagra. I can’t solve the problem when I press it with my hands, but it’s numb.
I took a video to sell it to me, and as a result, the sales side went crazy. A circle of people gathered around the phone to see my co-driver’s pillow bouncing, and then he drove to 4S. As soon as the technician got on the bus, he ran with me for a lap of the highway. As a result, the car seemed to behave like a child when he knew he was going to the hospital. There was no sound at all. If it hadn’t been for the video proof that the technician thought I was interested in him, I would have rubbed it. Later, after touching the copilot seat for a long time, the technician felt that the cover with the atmosphere light strip at the back was loose, so he took it off for me and covered it again, so I could use it. After this time, there has been no similar situation. No, no, no.

2. Copilot A-pillar abnormal noise (found by car friends and car owners)

This problem was discovered by a buddy of Cha Youqun. He asked us for a long time, saying that he always heard the voice of the copilot and let his wife listen to it for a long time. Later, he could not determine the source of the noise, so he went to 4S and walked around with the technician like me. Later, it was confirmed that there was a movement in the co-driver’s A-pillar. Listen to him say take down the interior panel of the A-pillar, fix a thick line inside and solve it. He didn’t know what the wire was. I guess it was the drain from the skylight. Anyway, he said it was much thicker than the wire.

3. The driver’s seat opens the door creaking (what I found)

This question is really said. I have found from a long time ago that after the driver’s seat opens the door, half of the car door hinge friction is very cheap, disgusting and maddeningly creaky. I studied it for a long time and found that as long as the door opened to 1/2, the sound would be louder and touched for a long time. When I found that there was a vibration in the door near the rearview mirror, I thought there was something inside the door, and then I found that the co-pilot had a similar situation. I was directly fooled, and then I couldn’t stand it and went to 4S to find the god.
I thought it was so complicated that I almost hugged the technician’s thigh with tears on my face. As a result, my little brother said, Oh, this is simple. I only dealt with two sets yesterday.
In fact, the reason is very simple, that is, there is friction between the rearview mirror and the adhesive strip in the window frame, especially when opening and closing the door, the solution is also simple, first remove the glass horn from the inside (525 or 530 lead did not choose Harman when I did not say), then remove the rearview mirror, and then wipe the contact surface between the rearview mirror and the tape cleanly, then cut the appropriate length of felt cloth and stick it on it. And then recover.
The younger brother said that almost all the new 5 series have this problem, and it is easy to deal with it, so I think as long as you have it, you can deal with it right away. You can do it yourself with strong hands-on ability (anyway, after I have seen it again, I can do it all).

4. Abnormal noise of skylight (found by car friends and friends)

If I remember correctly, it was a friend from Fujian, a batch of moldy. The headlamp was cracked inside, and the manufacturer did not change it, saying that it did not affect the use, and then said that the skylight made a strange noise and rebounded directly after it was closed. Moreover, the skylight kept talking on the way after closing, and now it is still under repair. It is said that the fixed screw will be replaced. If not, it is estimated that the entire skylight assembly will have to be replaced. This is a special case, not a common fault. Just take a look.
There is also a buddy is the skylight assembly after the 4S transfer, which is so unlucky that the dude is struggling to dismantle it or not.
!! After the forum rider “jinxing0826” hint: when the car teeth, or over the ditch Kankan, the car body twisting bar, there will be a sound on the roof, it is estimated that it has something to do with this.
!! “Don’t buy GM in the future” hint: the roof of my car is noisy, and there is no sound when I go into the shop for maintenance for 3 times (similar to that kind of strange noise). Later, I found that the cosmetic mirror was held up by something harder in the gap of the roof near there. (the soft material of the previous pad is not good, the car body will still ring after twisting vibration.)

5. The copilot’s position is abnormal (at least most people have asked me)

This is even more ridiculous. Many people are asking why the copilot is clattering. It feels like something is tapping on his window. I, Nima, Cai Qinba, who is knocking on your window, gasping for breath. Copilot seat belt! Card buckle! The iron one, slap the B-post! Adjust the seat belt buckle position, really can not buy a special plastic bag, perfect solution. A surprise every day ~ ~

6. About the abnormal noise of the plastic parts (interior panels) of the whole car (almost everyone has found out)

Not to mention this, since the day I picked up the car, especially after the sun in the summer, as soon as you got on the car and turned on the air conditioner to the coldest, the whole front interior panel seemed to crackle with setting off firecrackers.
This is really inexplicable, the interior panel is wood-grained, but the contact surface is plastic, and the tuyere in front is big and long. When I changed the mainframe, it was full of plastic parts. As long as it is plastic, there must be some sound as long as it is hot and cold. I personally understand that it is better than the crackling of some E finger. Well, if you want to be quiet, you can only work hard, all solid wood and metal. There is absolutely no sound, and it can cut off all wheezing. Well, where the hell did I write.
This is really inexplicable. I don’t know if it would be better to change the aluminum diamond panel, but in fact, it has been open for a long time, and it doesn’t seem to be so loud.

7. About whether the abnormal noise will occur after the refitted vehicle removes the interior panel and so on (my understanding)

Many riders will feel that as long as the car is dismantled, there will definitely be a noise. I was sure of it at the beginning.
But since I removed the front interior panel and the air conditioning panel because I changed the mainframe, and because I added the gentleman switch (see the previous post), I dismantled the main driver seat interior panel, and now that it is installed, to be honest, it is no different. Songsong must be looser than before, everyone knows that it will be loosened a little bit less tight, uh. What am I talking about. ~
But as long as the buckle is good, and then installed in the right position, there will be no abnormal noise, at least mine. I broke a clasp when the interior panel of my driver’s seat was removed, and the master changed it for me and installed it (many modification shops will choose to turn a blind eye to it, and my character is OK). Of course, it is also possible that I have not removed enough, , I have seen changes to the HUD and loudspeakers. The one who took it apart, tut-tut, naked.

Write at the end

!!! This post is a shared post, friends with abnormal noise problems can share the abnormal noise location, abnormal noise scene, and solutions to me in the comment area. I will update this post at any time, and mark the ID of the car friends, indicating the source, so as to provide a platform for the majority of cyclists to share the problem!
After work, thank you for coming.

The explanation of the picture and text that you like (don’t just look, give likes to the elder brother’s text ~ hey)

This is the back panel that my copilot’s headrest trembled and later removed.

This guy sent me a picture saying that there was an unusual noise on the copilot’s A-pillar and dismantled and fixed something inside.

My car, the driver’s seat crunches, at this angle.

The master pointed out to me with his finger that it was caused by contact in this place.

This position.

The copilot has the same.

I took a peek at the tape behind the copilot. Why did it feel loose?

The master began to break my A-pillar horn. Oh, easy, my brother.

This move, oh, oh, oh

For the first time, be gentle.

It’s broken. Oh, my God.

Please ignore my crayon Xiaoxin

This is what is going to be padded in that position, like a felt pad with tape under it.

It doesn’t seem to be very thick

Now start to remove my rearview mirror, how big a screw, a total of three

Disassemble

Take it off. What a big BMW logo.

All right, look down at the contact surface with friction, the dirty batch.

Look, I have a huge rearview mirror with parallel line assistance.

This is the place of friction.

Those pieces are filled with soft plastic, which shows that BMW has worked hard on sound insulation.

The places I touch with my fingers are all soft plastic.

Look at it this way.

The master cut a long strip and began to paste it.

Just post it like this.

It seems to be short. I’ll wipe it.

Cut a new piece and put it on.

Start installing rearview mirrors

Adjust the position ~ ~

The copilot also started the same step.

This is the picture indicated by my starting friends, and this is the position.

There is contact with the rearview mirror, and it is a common fault, all cars have it, and there is no one outside.

Dabai long cable, or handsome, after watching the end of work, remember to like manual text ~ thank you

Recommended Suppliers