530li Enjoy exclusive M carbon black truck lifting for two months and minor modifications

  7
 August 18, 2024
Coordinates in Shenzhen, the car was picked up on February 1 and has been on the road of minor modifications for more than two months.
My younger brother is 19 models of carbon black exclusive M optional HUD

The road to minor change chose the MP-style little Dark Vader.
Roughly the same route as the F10 535i used abroad
Slowly create the look you like without changing major items

(For F10 minor changes, you can refer to previous posts and add links)

Literary talent is limited, so don’t complain if you don’t like it.
Picture below

After checking the car, it was put on the bright black double-wire middle net, and the back was replaced with a carbon fiber single-wire one.
Double lines can easily get stuck in the air outlet!!!

The small silver label on the side has also been replaced with a bright black one, trying to turn all the silver parts of the car black

The carbon fiber shark fin shell installed together was removed after only a week of use, which affected the signal

I attached carbon fiber tail fins to my own bullet train, but I asked a master outside to re-attach them.

Carbon fiber top wings are also attached

The carbon fiber tail is still very nice

The taillight is covered with a slightly blackened film on the lower left corner, making it more three-dimensional.
The license plate is 6 in the front and 6 in the back. If you see it, you can tick it

After pasting. Can you tell the difference?

With carbon fiber front lips, they are much more handsome. The rearview mirror shell next to it hasn’t been replaced yet.
On the left is the Internet celebrity car on the forum

I changed the carbon fiber rearview mirror, but I didn’t use the horns because I planned to go in MP style

Before the color of the original wheel hub has been changed

Before the front brakes of the original car have changed color,

Before the rear brakes of the original car have changed color

I was worried about whether gold or yellow before, but I finally chose a bright yellow that was more eye-catching and eye-catching.
Darth Vader’s route must follow, put a black M label

rear brake

bright black

The wheel hub is painted with bright black inside and outside details are in place. I personally prefer bright black to dull black.
You must find a professional paint paint, otherwise the details will not work.

Load the car and put it on the map!

Is bright black and yellow calipers okay?
The reflective sticker on the round eyebrow was also put up recently, and it feels okay

Add a black M side label to add points for dark wind!

I feel that black wheels are more fighting.

sideways
The label posted on the rear window triangle is Shenzhen Five Series Group.

Compare the five series that have not been changed

Always add 98

I’m very satisfied from this angle

Make a list of minor changes

Headlight protective film, light black film for taillights
Yellow reflective strip on wheel eyebrow
Carbon fiber license plate frame
Carbon Fiber MP Front Lip
Carbon fiber single-wire middle mesh (previously replaced with a bright black double-wire middle mesh)
Carbon fiber MP rearview mirror
Carbon fiber top wing
carbon fiber tail
The original wheel wheels are bright black paint (unfortunately, li cannot choose black wheel wheels)
Calipers yellow paint with black M label
The interior has been changed to Baohua cover, tire pressure monitoring, and staring

To be continued:
M5 tail lip plus four outs (struggling because the tail throat needs to be changed)
Carbon fiber side skirt
Later, I also planned to put a matte black and some carbon fiber embellishment

Whether it is a major modification or a small modification, you must find a reliable store. This is a talk of experience that has been made small changes all the way
The road to modification of the small 5 will continue…

Recommended Suppliers