BMW 5 Series Construction Factory 360 Panorama Operation_Use car, Use car

BMW 5 Series Construction Factory 360 Panorama Operation

August 18, 2024

Friends who drive all know that cars have many blind spots in sight. In recent years, countless safety accidents have occurred due to blind spots. If you don’t know about blind spots, let’s take a look together.

The picture was found online. Let’s use this picture to take a look.

In order to avoid accidents caused by some blind spots in viewing angles, the 360 panoramic imaging system was born. Now let’s talk about what a 360 panoramic image is.
The 360 panoramic image assistance system collects images around the vehicle through four cameras. After algorithm correction and splicing, it forms a 360-degree panoramic top view of the surroundings of the vehicle and outputs it to the display, allowing the driver to intuitively see the vehicle through the display screen. The 360-degree panoramic top view of the vehicle around the vehicle has no blind spots in the career, realizing live broadcast of the reversing screen, easy and worry-free parking, and reversing! The unique 3D modeling technology allows the driver to see the situation around the car body more intuitively and clearly.

Wide-angle camera. The characteristics of a wide-angle camera are that the shooting angle is larger than that of an ordinary camera, and the pictures taken are clearer. If you look at it from this way, do you think this camera is also looking at you? This is the embodiment of a wide-angle camera.

360 panoramic camera

360 panoramic image switch control module

The original panoramic camera module depends on it for all the processing of the picture

Without damaging the wiring harness, you can plug it directly without risk of wire breakage.

A wide-angle camera mounted on the rearview mirror (because there are many wires on it and there is no way to open holes, a rearview mirror assembly was directly replaced)

Original front bumper camera fixing bracket (the original car has no holes, so it needs to be replaced)

I took the bumper and looked at the impact beam. It was still quite thick. It didn’t feel like the kind that would deform when touched as others said.

The front one is installed in this hole in the middle of the center net

Remove the door panels on both sides of the front door. The masters were very careful and checked each door nail after disassembly to see if it was loose.

Remove the rearview mirror, just remove the two screws here, and it will be okay

Rear view mirror of the original car

The mirror assembly is installed

Install the camera on the trunk (look, it’s looking at you again)

The trunk is completed (alas, why don’t you look at me)

It will look good after putting it in the shell

The 360 panoramic image switch control module looks like there are only two more buttons, but in fact, there are also more modules and wiring harnesses.

Installation completed, perfect fit

Front panoramic effect display

Panoramic renderings on the right

Panoramic effect on the left front

Left rear effect

If you are perfectly completed, you don’t have to worry about being invisible because you can’t see it in the blind area. It’s safe and practical. [I hope this post can provide help to the majority of riders]

Recommended Suppliers

Hot Information

Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group

April 1, 2024

Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja

March 27, 2024

JCTSL may turn bus stands into charging points for e-buses

March 27, 2024

Vehicles

Tyre

Auto Spareparts

Material

Const machinery & Agro equipment

BMW 5 Series Construction Factory 360 Panorama Operation