Initial test of 530Li automatic lane change auxiliary function

  6
 August 19, 2024
When selecting a car last year, I determined that L2 was a must-have function from the beginning. After some comparison, the 530Li was locked in at the end of the year. I was originally prepared to choose the exclusive option of +5AU+HUD+ steering wheel heating + rear seat heating.

After the family leader tested administration, he was planted by the stars and began to consider administration. I tried many times with the sales of 18 martial arts classes of four 4S stores, and successfully negotiated a 20-point discount for administrative services with one store, including a bare car of 450,000 yuan (phased in for 5 years, repayable in 2 years), so I immediately ordered 23 administrative campaigns.

After picking up the car in February, all other functions were unlocked one by one. Only the automatic lane change assist function has not been successfully tried at high speeds and elevated altitudes.

Last week, I went to the 4S store to upgrade the 0323 version of the system. After consulting after sales, I was told by the technician that I had dialed the turn signal incorrectly.

When turning, if you turn directly to the end (2nd gear), automatic lane change cannot be activated;

Only when you gently turn it to first gear (you will automatically bounce back to that gear as soon as you let go) will the vehicle trigger an automatic lane change.

Moreover, in addition to this, there are a series of conditions and restrictions:

According to the above principles, I tried on the elevated road, but I failed to challenge from 70-100km/h. When there was no car in a long distance, front, left, back, back, and back, no matter whether I gently shift the steering lever to first gear and let go, or I keep manually controlling it in first gear, I cannot automatically change lanes. Very strange, I once thought that there was a problem with my car and considered whether to repair it.

Today, on the high speed, in the range of 110-130km/h, I tried it again. Even if there were cars within a short distance in front of and behind the lane I intend to enter, I could still make a neat and smooth change of lanes. It was very cool.

After the automatic lane change condition is triggered, a lane change guide arrow appears on the right side of the steering wheel in the HUD, starting to change lanes

Silk crossing lane mark line

Basically pass the mark line

The lane change is completed, and the lane change arrow disappears

Then he turned to the left and said,

Smooth lane change

Throughout the entire lane change process, the determination to change lanes was not radical but positive. The lane change process was crisp and neat, without dragging water, smooth and smooth, giving the feeling of an old driver. Like it?????

After getting off the highway, going up the elevated road, and then using a speed of 80-100km/h to test the automatic lane change, none of them were successful, which is also strange. I can confirm that there are no vehicles close to each other, but I just don’t activate this function. Guidance from motorists who know the reason is welcome.

Recommended Suppliers