Kangaroo claw cooling technology, Audi S3 replaces DBA street version T2 streaked brake discs
Brand: Audi; Model: S3 (8V); engine: 2.0T (EA888GEN3); year: 2018; Project: maintenance
Practical, car owners choose high-performance brand accessories to replace the brake system. Many S3 owners like to change the brake kit directly to achieve stronger braking effect. this time, they choose not to replace the original calipers and improve the brake performance.
DBA street version T2 scribed brakes, imported from Australia, use high carbon steel alloy cast iron, with high thermal conductivity and low elasticity, can effectively reduce the failure of the car and improve heat dissipation to provide stable performance, KangarooPaw kangaroo claw heat dissipation design, the use of diamond water drop pillar ventilation, higher cooling efficiency than the traditional marking plate.
DBA (DiscBrakeAustralia) is a professional car disc manufacturer from Australia with a history of more than 30 years of manufacturing high-performance car discs.
. According to the use site of brake disc, it is divided into street series, 4000 series, 5000 series and 4×4 four-wheel drive off-road series. Among them, the street series is an entry-level product, which is suitable for models with a small range of modification. The 4000 series is more suitable for street high-performance modified vehicles, and the horsepower of these models is significantly higher than that of the original. The 5000 series is able to cope with the increasingly severe test of the track, and its unique floating disc design is more capable of KangarooPaw (kangaroo claw) advantage on the fierce track. In order to solve the problem of brake weakness of four-wheel overpass models, when it involves trailers, downhill sections or water-wading resulting in rapid change of heat, DBA has designed a series of 4X4 systems for driving vehicles.
EBC brake pads, a brake system supplier from the UK, are gradually opening up sales in China, and many performance car players choose this brand, especially yellow leather, as brake pads for daily use.
The side of the brake disc is engraved with the number of DBA and the minimum thickness 27mm. If the brake disc is worn to this thickness, the brake disc needs to be replaced. The initial thickness is 30mm, that is, the worn 3mm needs to be replaced. Please pay attention when using it.
From a practical point of view, this set of original calipers, with DBA340mm brake discs, EBC yellow brake pads, GOODRIDGE brake steel throat, TYP200 brake oil, can be used in street driving. It costs less than replacing the brake kit, and basically the same braking effect can be achieved. If you want to make it on the track, you will have to replace the competitive brake kit, and this brake system is not enough.
This is another car friend to the store to replace the AP9540 brake kit, 18-inch wheels just can fit this brake kit, appears to be very full.
Basic parameters: Audi S32018, maximum engine power 213KW (290 hp), maximum torque 380Nm, length, width and height: 4474X1796X1392 (mm), seven-speed double clutch transmission (DCT), front all-wheel drive (full-time all-wheel drive), official 0-100KM/H plus: 4.8s.
OZ wheel I-Tech series LeggeraHLT model Matt silver gray 18-inch, with the original red calipers, 340mmDBA scribed brake disc, but also very full, the visual effect of the brake kit.
The key point of changing the brake system is that after replacing the brake disc, the running-in operation needs to be carried out. Due to the coating on the new brake disc, the brake will be softer while driving, and the operation of opening the brake disc will be carried out on a safe road. Accelerate to 70-80 km / h, step on the brake vigorously, do not stop, and do not step out of the ABS. Repeat 6-8 times back and forth, stop for about 15 minutes, and drive normally after the brake dissipates heat. To achieve a better braking effect.
Recommended Suppliers