[Huaxia Zhijue][DIY]~~ MG GS 1.5T throttle cleaning steps
Since picking up the car, 1.5 Pride Da Bai has traveled more than 45000 kilometers. I was thinking that the throttle valve should be cleaned. The SSSS has long passed the prescribed number of cleaning kilometers, but I personally don’t believe that going to the SSSS to do these so-called maintenance that costs money. Read online posts, combined with the practical experience of the MoC brothers, we can have enough food and clothing for ourselves, and we can drive it by the poor. Saving money is the last word!
Summary after this operation: 1. There is no need to remove the negative pole of the battery during the entire process; 2. Don’t move all nearby connectors except the only connector connected to the throttle. 3. When the vehicle is turned off, you only need to press the one-button start button to power on, and you don’t have to press the second time to light up the instrument panel. 4. Cleaning is completed, installation is completed, the fire started successfully once, and no fault codes and error codes are encountered. Code, also need to initialize the steering wheel and window down-down systems.
As usual, take a beautiful photo of Da Bai first!
After running more than two years of kilometers, I can make up an auspicious number!
Looking at the entire operation, excluding your own labor costs, the material cost is 9.9 yuan, and it is also free of postage, so that you can’t save any more.
Spray directly without using auxiliary items such as a toothbrush.
Don’t skimp on cleaning agent and spray it everywhere!
Carbon deposition is not too stubborn.
After spraying, check it again and make sure that all carbon deposits have been removed. Follow the previous steps and install it back in reverse.
If you have any questions about actual operation and installation, please feel free to pay attention to me privately.
Recommended Suppliers