Kodiak’s selection of practical 5053/5054 hidden tutorials

  9
 September 2, 2024

Hello, everyone. I am a Kodiak car lover from Guizhou. I have been buying a car for * years (picking up a car in August 2018). Since I picked up the car, I have studied some small things by myself, and finally I have summarized some good hidden functions to share with you. My car, which has been the flagship of 380TSI for 18 years, has been changed to the first 4 Breebo forceps. Specifically, I will enjoy it with Yi and Da.

After changing the interior of the LCD instrument, the gear handle has also been changed.

To avoid Breeber’s big 4 brakes, a 1.5cm forging washer was added.

A recent photo of an eyelash lamp.

OK, let’s get down to business– I’m the dividing line–

Preliminary preparation for brush hiding: one HEX5053 cable (with VCDS diagnosis software) / VAS5054 or 6154 diagnosis first (with OIDS or ODIS-E diagnosis software)

After entering, I will classify it into categories. First of all, it is about the meization code of access control:

09 Central Electric Appliances-31347-20103-20103-20103-20103

OK, the preparation work is done, and then I’ll separate 09 from 5F 17.

09 the concealment of the central electrical appliance:

Change lane turn signal 3 to 5 flash: match, search: KomfortblinkenBlinkerzyklen → choose to change the value from 3 to 5

Automatic headlight sensitivity: search Lichtsensorempfindlichkeit → to be insensitive

Brake 4 taillights are all on

(8) change leuchte23SLHLC10-LichtfunktionC23 to brake lamp

(10) leuchte23SLHLC10-LichtfunktionC23 changed 0 to 127,

(8) change leuchte24SLHRA65-LichtfunktionC24 to brake lamp

(10) leuchte24SLHRA65-LichtfunktionC24 changed 0 to 127,

(8)-Leuchte27NSLRC6 → LichtfunktionC27 changed to brake lamp

(10)-Leuchte27NSLRC6-DimmwertCD27 changes 0 to 127,

23 is left width light, 24 is right width light, 27 is high brake light

Taillights cross:

Change leuchte23E23 to BlinkenlinksDunkelphase

Change leuchte23DimmwertEF23 to 100th

Change leuchte23DimmingDirectionEF23 to Maximize

Change leuchte23G23 to BlinkenlinksHellphase

Change leuchte23DimmwertGH23 to 0

Change leuchte23DimmingDirectionGH23 to Minimize

Change leuchte24E24 to BlinkenrechtsDunkelphase

Change leuchte24DimmwertEF24 to 100th

Change leuchte24DimmingDirectionEF24 to Maximize

Change leuchte24G24 to BlinkenrechtsHellphase

Change leuchte24DimmwertGH24 to 0

Change leuchte24DimmingDirectionGH24 to Minimiz

23 is the left width lamp, 24 is the right width light

Open the door and turn on the brake lights:

Change leuchte20DimmwertEF200 to 100th

Leuchte20LICHTFUNKTIONF20 was not activated and changed to Tuerausstiegslichtlinks.

Change leuchte21DimmwertEF210 to 100th

Leuchte21LICHTFUNKTIONF20 was not activated and changed to Tuerausstiegslichtrechts.

20 is left brake light, 21 is right brake light.

The eyelash lamp is lit at the same time as the daily light:

Change leuchte16E16 to daytime driving lights

Change leuchte16DimmwertEF16 to 127,

Change leuchte16DimmingDirectionEF16 to maximize

Change leuchte17E17 to daytime driving lights

Change leuchte17DimmwertEF17 to 127,

Change leuchte17DimmingDirectionEF17 to maximize

The front steering assist is turned on as a fog light:

Change Leuchte2SLVLB10-LichtfunktionB2 to NebelschlusslichtwennkeinAnhaengergesteckt if not activated

Change Leuchte4TFLLB4-LichtfunktionB4 to NebelschlusslichtwennkeinAnhaengergesteckt if not activated

Change Leuchte3SLVRB21-LichtfunktionB3 to NebelschlusslichtwennkeinAnhaengergesteckt if not activated

Change Leuchte5TFLRB32-LichtfunktionB5 to NebelschlusslichtwennkeinAnhaengergesteckt if not activated

Lock car horn:

Channel IDE02269-ENG116669- acknowledgement signal-AkustischeRueckmeldungglobal is not activated

Channel IDE02269-ENG116670- acknowledgement signal-AkustischeRueckmeldungSignalhorn is not activated

Channel IDE02269-ENG116667- acknowledgement signal-AkustischeRueckmeldungverriegeln is not activated

Channel IDE02269-ENG122188- acknowledgement signal-MenuesteuerungakustischeRueckmeldung is not activated

PS: after matching the central electrical system in 2009, be sure to make a setting-all the matching values are reset, otherwise some functions may disappear!

-I’m the dividing line, and then there’s the 17 instrument part–

Motion pointer: 17 dashboard → coding control → long coding helps → 2 byte BIT0 tick

Fuel filling: 17 dashboard → code control → long code help → 10th byte BIT4 tick

All right, here are some of the more practical functions of various models, which may be continuously updated in the future. Welcome to follow up, welcome to private messages, and welcome to join Skoda Kodiak’s big family to discuss with each other.

Recommended Suppliers