Replace the left rear brake lamp bulb
The lights of a car can not only play a lighting role, but also have a speech function. The lights must be used rationally. Turn on the low beam when the road conditions are good. Only when the road conditions are bad and there is no car on the opposite side can the high beam be turned on. Turning on the high beam will make it impossible to see the road conditions of the car that is going on. If an accident occurs, you will have to bear the responsibility. Although the front lights are important, the rear lights are equally important! Turn on the lights at night and the taillights are turned on to remind the rear car, as well as to show the profile! If the side light is not on, it is very dangerous to drive on the road. Let’s talk about the brake lights. The brake lights will come on when slowing down and braking. They will also come on when you step on the brakes during the day! When the rear vehicle sees the brake lights of the car in front light, it will know that the car in front is slowing down or stopping, which will remind the car in front! This thing is not important!
Recently, it was reported that the light bulb failure light on the instrument panel was on, but you can also look at the two lights in front! Then I asked my wife to step on the brake and check it. It turned out that the left rear brake light behind was not working. I had to replace it quickly. This light bulb is very important. It always reminds the vehicles behind and affects safe driving. It has to be replaced! Drive safely and don’t be sloppy! I decided to buy one online and change it, learn it, and use it after replacing it. However, the quality of the one I bought online was too poor. I haven’t used the two light bulbs for a month!
Next, share the replacement process for reference by riders!
Next, share the replacement process for reference by riders!
As long as you find that there is a faulty light bulb on the instrument panel, the one behind it will definitely not light up
Find the left rear taillight and remove this obstruction
There are two buckles at the top and bottom. Slowly lift them up and you can take them off.
After lifting it up and looking inside, you can see a plastic screw.
Turn the screw counterclockwise and remove the screw
Then you can take off the light here. Be sure to pay attention when you take it. There is also a connecting cord on it. You can also take off the connecting cord before you leave the car. There are four buckles. Slowly move the buckles out. Don’t use brute force or break it!
Take a look at that white light bulb. It has turned black.
Install new light bulbs on, do you see that one is not on and the other is on? The white light bulb only comes on when you step on the brake freely
Look at the front and it lights up when you press on the brake
It’s too dirty in here, wipe it
Push the light inside, tighten the screws, connect the connecting wires inside, and complete the perfect replacement!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024
Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024
You May Like