Zotye T700 upgrades the new version of BCM brush tutorial

  12
 September 2, 2024
Since the old version of BCM has a risk of leakage, I will share the BCM upgrade tutorial of Zotye T700 as follows for everyone to use in emergencies:
Brush tutorial:
1. Find the location of the BCM module from the top left side of the main driver’s seat, take a photo of its label part, and record the part number of the module (arrow position), for example
2. Find the corresponding brush file from the brush package according to the module part number. Remember that different modules correspond to different brush files, and remember not to brush wrongly! See the following table for details:
3. Copy the latest version of the corresponding file to the root directory of the USB drive (which needs to be formatted)(the following is all the unpacked files, just copy the corresponding number of your own BCM)
4. Completely power off the entire vehicle once (disconnect the battery negative pole for more than 2 minutes and reinstall it)
5. After the ignition switch is in the OFF gear (important), plug the Zotye special detector into the OBD socket of the original vehicle
6. Select Diagnosis-Controller Brush-T700-Body Control System Brush-Execute ECU Brush on the special inspection in turn. When the screen shows you want to insert a USB flash drive, insert the USB flash drive with the copied file, click Confirm and select the files in the USB flash drive, execute the upgrade procedure (about 5 minutes), and wait for automatic completion
7. Enter the special inspection again and select the body control module-version information-equipment software number, and determine whether the upgrade was successful based on this number. At this point, the BCM upgrade is completed.
Thank you all for watching!