Ax4 Replace the left and right brackets on the inside of the bumper
TiffanyFrank 
11 
After seven years of maintenance, the car was accidentally seen that a hole had been rotten on the left side of the bracket
There’s no hole in the right side. Look, this is pretty serious.
Go online and look at it, it should be that the design problem or the material problem is bad
Googled online how to remove the bumper There is also a bracket installation diagram
arrival Remove and paste with original spare part number and prepare for spraying resin glue
Spray and dry for a few days Spray it once a day
Remove the upper screws first and the upper screws are fine. The one at the bottom is pretty tight
The old ones are ruined when you take them down
The new one is finished. OK
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
