Process of setting hidden functions in Yuanzheng Box

  11
 September 3, 2024
Seeing someone in the group set up a hidden function through the Yuanzheng box, he was ready to move, because he was not very satisfied with several functions: first, the air conditioner could only blow the legs or face, not at the same time, which was absolutely unacceptable. Second, there is no sound until the reversing radar is about to meet, and it has hit the rear object several times. If you can solve these two, you can toss about! Ha ha
Contact everyone recommended Fengyun Feiyun, looking for his rental box, real-time proved that everyone’s choice is correct, first, the service is very good, very enthusiastic, at first nothing, he taught me how to use it bit by bit, the second is to save the cost of opening Mercedes-Benz, ha.
Settings for several functions:
1. Gently turn the light to flash 3 times to flash 5 times, this is the same as the tutorial.
Enter the box-system selection-SAM-DR front multi-function module (N10Universe 1)-hide / modify-parameters-turn signal flicker times-flicker times 3 (default) change to 5-point write code, click the write code button and wait for the computer to write the code itself. In this way, please press the steering lever again, and the steering light will turn on 5 times.
two。 Reversing sound and light synchronization, this is different from the tutorial, the detailed settings look at the picture behind
After connection, select automatic search model for OK—- system selection-PTS parking auxiliary positioning system (N62)-select setting code-configure sound output (default volume 2 (80%) parking process alarm sound, select Yes. In the “continuous alarm at the rear during parking”, check the box. And increase the volume of the rear radar to 100%. Just save and exit. Do not change the front radar, the front radar can not continue to alarm. Otherwise, the front radar will keep dripping in traffic jams.
3. The air outlet is adjusted to blow both the face and the feet at the same time. I didn’t understand this at first, but it was set at the back.
Automatic search-system selection-AC- air conditioner (N22-7)-customer requirements-possible settings for air distribution-generally choose 5 is enough.
4. Turn on the daily traffic lights at night and reduce the brightness, which is a good setting.
In the SAM-DR front multi-function module (N10swap 1), find the day light option, enter, and choose the night light brightness of 20%. This is more eye-catching, and the car opposite does not look dazzling. In the E class of W212 abroad, when the headlights are turned on at night, the daily lights are on, but the brightness is weakened. When domestic manufacturers leave the factory, they all turn off the daily lights at night.

Rent it from him. Don’t get the wrong guy.

First visit the official website to download APP

Download the app of the box pro

The content of Mercedes-Benz has been purchased, so you don’t have to spend any more money. Be sure to download the update before you go to the car to operate. 600m?

After receiving the box, insert it forcefully. Don’t forget to take off the protective case.

Open APP to enter diagnostics

Just choose automatic search. There are too many manual choices. It’s troublesome.

It was quickly identified.

Scanned the fault code once, and it took a long time, 4-5 minutes.

Swept out of the fault code, do not seem to feel a fault, cleared for a while.

When I set up the air conditioner to eat my face and legs, I saw that this interface was a little silly. After studying it, I knew that it was OK to press F2. Change 5 (ECE) to 5 (USA).

Setting up the reversing radar is different from the tutorial, just choose the last “activate”.
Very satisfied with this setting, spending a small amount of money to do big things, in line with the central idea of the strict version of he version, hehe