[Wandering people and cars] It’s fun to do it yourself, remember to replace the air conditioning filter elements on your own
EricDaniell 
9 Where has time gone? In the blink of an eye, my Bo Yue has been with me for seven years. Although when I was doing routine maintenance in the 4S shop four months ago, the maintenance master had already removed and cleaned the air conditioner filter, but after a summer of frequent use of air conditioners, it is also the time when bacteria in the car are most likely to grow. In addition, it is autumn again, and in February, the hot air conditioner on the car will be used every day. For the sake of health and ensuring fresh air in the car, the role played by the air conditioner filter element is very important at this time. Because of this, this filter element has been used for more than a year, and it is still necessary to replace it. Here, I would like to first thank the gods with strong hands-on skills on various platforms for their do-it-yourself replacement videos and the recommendations of air conditioner filter brands, so that I am not lost in a daze. The video sharing of the whole process of DIY replacing the filter element allowed me to learn the methods and skills of disassembly and assembly, so that I didn’t blindly start, saved time and energy, and made the actual operation less difficult. I would like to express my great gratitude.
Without saying much, I will directly submit the picture and start working. I hope everyone will like it and support and correct it more. Thank you.
Without saying much, I will directly submit the picture and start working. I hope everyone will like it and support and correct it more. Thank you.
For the tools used, thanks to Aika, the super practical prize you won in the essay collection for previous activities.
Air conditioning filter elements based on the recommendations of riders
The air conditioning filter element is installed in the glove box. Open the glove box and empty things first
There are buckles on the left and right. This is the buckle on the right. Remove them first.
The one on the left has also been removed
Open and remove the right side, use your fingers to push from the outside to the inside
Turn it up from the inside, and the buckle will loosen and you can take it off
The same goes for the one on the left
Turn it around and take it off
The removed buckle has no left and right sides
After removing the buckle, the glove box lid is still connected by a buffer bar
Hold your head with vise and push the bumper bar out to the right with your other hand
Once you disengage the bumper bar, the glove box will come down.
See the plastic cover fixed by screws inside and remove the three screws with a Phillips screwdriver
After removing the outer cover, there is also a cover inside
Remove the buckle on the right of the cover and you will see the white air conditioning filter element inside
The original Geely factory Valeo from the 4S store held here and pulled it out
After pulling it out, this is how it looks
After using it in summer, it’s so dirty
The new filter element still needs to be installed back in this direction
It’s in.
Then snap the lid back on both ends
Put the outer cover back on
Tighten the three screws back
Then buckle the buffer lever back on with a little force
OK to
Buckle back on the right
Buckle back on the left side
Perfect, complete
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
