Set off again-update the display screen and replace the shock-absorbing dust cover and valve chamber cushion

  4
 September 3, 2024
Last time, when talking about Flying Song Navigation, hang up and put the original car Liuyi CD back on the bus.
Portal: https://www.xcar.com.cn/bbs/viewthread.php?tid=97915183
Although it is authentic and the sound quality is online, but the hard installation of the rear view and side view is still unwilling, until one day brush some treasure, random into a car small screen, immediately opened, who said there is no central control can not be visible?

Place an order. It comes with a removable bracket, which can be inserted into two video channels at the same time. White plug is preferred. As for the display quality, it can only be said to be mediocre. After all, our cameras are all mixed brands.

It’s just a little thing. There are bigger and cheaper ones, but after a long time in the car according to the size, it’s a bit LOW beyond this size. 3.5 is just right (and the most expensive).

At that time, the temperature was very low, and the plastic parts of the old car could not resist tossing and turning, so it took a long time for the car to start work. Finally determine the installation position of the above picture, there are steps at the tuyere in the upper left corner, the position of the bracket is not suitable, the angle installed on the side of the A column is not suitable, and if the position of the CD panel is tested, the adhesive surface spans two decorative panels and interferes with the emergency switch. Finally decided to use double-sided glue Velcro paste directly in this position, is it not surprising?

No sense of disobedience, is it? The photo on the back was not taken at that time, there are three buttons, adjustable language, brightness, contrast, color. Anyway, it’s a Velcro, so it’s convenient to tear it off and press it directly.

Before the addition of the two original switches, the left one is connected with a self-locking relay for side view, and the right one is used to force rearview, and the reverse gear can be switched automatically. The original camera harness and power harness are all there, just connect directly to this small screen, details and ideas can see the previous post. Although this small screen can give priority to reversing two inputs, the original line has already achieved this function and does not want to move any more.
Portal: https://www.xcar.com.cn/bbs/viewthread.php?tid=22092270

Cut a corner of the center control panel and easily lead the wire through the audio panel, which can be covered by the screen.
Installation completed, screen 65, Velcro is the rest of the decoration, zero man-hour fee.
You can do the work above, but you can’t do it down there.

The car is too old to compare with the new car. Years ago, it was found that the shock absorber and dust cover was broken. If this thing is broken, the dust may seep into the oil seal of the shock absorber, resulting in oil leakage failure.

The one on the right is completely broken, and the one on the left is fine. Considering that there is an occasional abnormal sound in the direction of playing before, it may be due to the top glue or the flat bearing, so this time it is all changed. After changing, I found that it may not be their reason, bearing and top glue are all right, come and change it all.
Dust covers can also be bought in the southeast, the top of the tower can only buy cool, flat bearings buy imported Mitsubishi, the two sets cost a total of 320 yuan.

The shock absorption press removed feels that the resilience is not enough, but there is no oil leakage on both sides, which is more magical. Front shock absorber is too expensive to affect driving, so let’s do it for now.

When the spark plug was changed two years ago, it was found that there was oil on the head of the high-voltage wire. Recently, it has seeped more and more seriously near the valve cover, and it has also been changed.
Is it all right to see if it’s all right? Has been fully synthetic service, half a year to change, no oil accumulation, camshaft smooth as a mirror. Note that according to the requirements of the maintenance manual, a little glue is needed at the seams at both ends of the chain.
This is the first time and should be the last time.

The cushion feels like plastic. With a gentle pinch, the cushion cracked cleanly. For more than a decade, it’s understandable.
The cushion bought by Shenyang Aerospace is only 30 yuan, which is also right in terms of blood, and the original factory is several times more expensive, so forget it.

The work cost is two hundred, the preparation is finished, and it ends with a hot-eyed engine cabin.
There is another wordy article in the water, and the jar is becoming more and more desolate. In the past two days, the boatman is always comfortable lifting the table and lifting the floor, which is really irresistible. I don’t know if I can write a few more posts in this water. However, as a good partner in life, we can’t mistreat it in our own hands one day, and each water post should be regarded as a record of the intersection of its fate with itself.
Finally, I wish you all a healthy car and dragon horse spirit.

Recommended Suppliers