2011 Aohu, replacement of machine feet, wheel bearing operation

  3
 September 3, 2024
I haven’t had time to come to the forum to add water for what happened in May. Today, I have no time to add water.
I can always hear the buzzing sound while driving, so I bought a bearing and replaced it. It’s 26W +, and the four pins have also been replaced.

Find an agent and choose NTN bearings.

Steel seals and things are very clear.

I thought there was a problem two times before, but when I checked it, I found that the latter one also rang. I replaced another one and replaced it.

Preparation of the two front wheels.

Remove the front

Keep tearing it down

Or tear it down

Take it apart and put it new.

Compare the old and new.

It’s been a long time, and I can’t tell the difference between the beginning and the beginning. Let’s see how to deal with it.

Remove the back

Bearing disassembly is nothing, but the feet are troublesome. The easiest thing to do is the front foot

Family portrait.

This is the front one.

This is on both sides of the engine.

This is for the gearbox.

Remove the front and compare the old and new.

It’s a little more troublesome to remove the two sides, but you have to distinguish the directions

From the right front perspective of the engine, there is a small gap in the foot, and both sides are diagonally facing the engine.

Remove the two sides and compare them.

Remove the gearbox.

Need to be disassembled and exhausted.

Put on a new one, and put the exhaust back in

The old one was taken down.

All the old and new ones that were removed were in the car.

Recommended Suppliers