Feeling about repairing the missing wheel hub ~~~
NatTennyson 
8 
The wheel hub is out of round ~~ The dynamic balance is perfect, and I don’t feel uncomfortable driving at high and low speeds. I just struggle ~~
Search for reliable stores online and visit the store to observe the maintenance process ~~
The style of the store belongs to the feeling of a “fly restaurant”, which means that it does not pay attention to appearance and face projects, but the food tastes authentic and delicious ~~~
This is repairing the wheel hub ~~~
After a skillful and undamaged wheel hub disassembly operation, my out-of-round wheel hub has been put on the grill ~~~ This is to determine the area where the out-of-round dent is located ~~
The high temperature softens the wheel ~~~ Then use a small hammer to round it ~~~ I don’t know if the process is authentic, everything relies on manual technology ~~~ Reflects the spirit of craftsmanship ~~~
The machine rotates the fixed wheel hub at high speed, and uses a fixed polishing tool to cut off some bumps and bumps ~~
Polishing excess dirt ~~~
In the early stages of OCD, the patient said it was very comfortable ~~~ Finally, he used water to clean the wheel hub, which could not be washed when washing the car ~~~
Next time you change the tire, you can also do it here. The main thing is to clean the wheel hub ~~~ Especially where the tire and wheel hub are combined and sealed is more important ~~~
Next time you change the tire, you can also do it here. The main thing is to clean the wheel hub ~~~ Especially where the tire and wheel hub are combined and sealed is more important ~~~
Let me talk about my personal experience. If the dynamic balance can be achieved at 0, I don’t have to worry about it. I discovered the problem and I will go through it when there is nothing to do. This kind of knocking and beating, bone cutting and plastic repair will definitely have some impact on the rigidity of the wheel hub, and should not exceed the redundant design scope of the overall rigidity ~~~
This problem basically occurs in the car every two months, but it will recover within a month, but this time it is more than a month, so I would like to ask everyone for your maintenance suggestions for this fault. The fault code reported by the computer involves the 360 camera. It is estimated that the 360 camera and the camera on the front glass belong to the same wiring system. This failure will cause the automatic high beam to fail, so it must be repaired. No place to turn off the intelligent automatic high beam was found. Mercedes-Benz’s first-generation intelligent automatic high beam really does not allow drivers to suffer losses at all ~~~ Turn off actively and turn on slowly ~~~
Please also ask for advice from anyone who knows about it ~~~ Thank you!!
Please also ask for advice from anyone who knows about it ~~~ Thank you!!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
