Tips on polishing and waxing
NicolaElla 
15 I have been washing and waxing my own car, and the paint surface is well protected. Thinking that I have polishing and waxing services, I will make an appointment one day in advance and get it done well.![]()
Prepare for construction, polish first, and do protection first
It is relatively clean, so the differences before and after construction will not be particularly obvious
before construction
I think the material used is this
began
Start with the cover first
details
You can see dirty fine particles
Continue construction steps
After finishing the cover, start with the side, left and right, then the rear of the car, and finally the roof
left rear door
left front door
left front door
left fender
left rear
The workshop can be seen in the resting area on the second floor
Roof construction
The front is all polished parts, but the waxed parts at the back are not photographed. Finally, looking at the effect, the surface feels slippery to the touch![]()
When I came back to pick up the car, it was already parked outside, otherwise it would be an indoor photo from the same angle.![]()
When I came back to pick up the car, it was already parked outside, otherwise it would be an indoor photo from the same angle.
By the time I came back, it was parked outside.
Go back to the park parking lot and have another one
Both have 2.5 displacement. Which one do you prefer?
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
