[2022 Hot Search Top] Carbon accumulation in pulse carbon deposit cleaning cylinder
ClareTate 
12 Recently, when I was sitting in the car, I felt that the engine was shaking a little too much, and the acceleration resistance was poor. The engine fault light sometimes flashed a few times. I don’t know what’s wrong with the vehicle, so I had to go for inspection and repair it immediately.
A friend was doing vehicle maintenance, so he rushed to his repair shop early in the morning to carry out inspection and repair.
A friend was doing vehicle maintenance, so he rushed to his repair shop early in the morning to carry out inspection and repair.
According to my description, he first carried out a systematic inspection of the vehicle. Based on fault experience, he judged that the spark plug had the possibility of burning through and that the carbon deposit on the throttle valve in the cylinder was seriously caused.
I have heard of cleaning carbon deposits in cylinders before, but I have never seen how to operate it.
First remove the ignition coil, take out the spark plug, and use a speculum to check the serious carbon deposit in the cylinder.
This is the inspection status of the carbon speculum inside the cylinder. It is black and black.
First, pour the cleaning solution used to clean the carbon deposits in the four cylinder blocks into the cylinder blocks, place the pulse instrument, and start heating and removing carbon.
Heat for about half an hour, remove the instrument, and use a brush to clean the accumulated carbon in the cylinder, so as to clean all parts in the cylinder.
After cleaning, start cleaning the carbon deposit cleaning solution in the cylinder.
According to my observation, the process of cleaning carbon deposits in the pulse cylinder is that the carbon deposit cleaning solution removes and dissolves the carbon deposits attached to the cylinder by heating to achieve the cleaning effect.
After cleaning the carbon deposit cleaning solution in the cylinder, use an air bag to blow dry the inside of the cylinder. At the same time, the small carbon deposits remaining in the cylinder can also be blown out.
The above two pictures are the pictures displayed by the cylinder endoscope after pulse carbon deposition cleaning, and they are already very clean.
Install the new spark plug, install the ignition coil, and clean the throttle.
After the above work is completed, all parts are installed, and then fire and test run.
Through the test run, the overall feeling was that the engine shake when sitting in the car was basically eliminated, the acceleration state was stable, and there was a great feeling of pushing back.
The vehicle returned to normal driving.
Pulse carbon cleaning is really a good way.
The vehicle returned to normal driving.
Pulse carbon cleaning is really a good way.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
