“Spring Service Festival” Professional matters should still be handled by professional people
It’s good to have a car. It’s been a year since Rong Fang picked up the car. It’s good for driver Rong to walk around and have a look around. It’s normal to have a little scratch after driving for a long time. Rong Fang is parked outdoors 24 hours a day. There will inevitably be small scratches and pits and so on. How can I watch obsessive-compulsive disorder? go to the after-sale maintenance service store the next day after driving and have a comprehensive check. After-sales master detected some small pits, the area is not big, but a little big, Shifu Jianyi I spray paint, time-consuming and costly. Although the effect is good, I have to listen to the after-sales master’s advice, thinking that there is still a need for a big fight? If you spray paint yourself, it is economical and exercise your hands-on ability. Although the effect is mediocre, it is better to find a professional to deal with it. The after-sales staff went through the formalities for me, and the after-sales master began to work. The service of the staff was really good. Let me drink tea and watch TV in the lounge. You can also watch the whole repair process through the big glass. The picture above
Make an appointment in advance, the staff will arrange the car to enter the workshop, the service of the staff is really good, give them a like!
After-sales master comprehensive inspection, find problems, deal with them in time.
I can’t repair the scratches. It needs to be painted.
This is a scratch on the eyebrow of the right front wheel, and it needs to be polished and painted.
Please note that the wrapping work must be done in place, otherwise it will affect the effect of painting. And it is troublesome to remove the excess paint layer. First, gently polish the scratches with thicker sandpaper.
After the scratches are polished and smooth, a small amount of putty can be scraped to fill the pits. Facts have proved that the process of scraping putty can not be less, otherwise there will be faint pits after painting, which will affect the construction quality. The spray-painted area around the scratch also needs to be sanded, but sanded with more than 1000 mesh of sandpaper. The grinding effect will feel perfect with a small amount of water.
The cover of the wheel eyebrow should not be vague, and the floating car paint particles will be attached to other parts of the car body, which will be very laborious to clean up at that time. The treatment of wheel eyebrow should be polished as a whole to avoid uneven color.
How about the effect of the package? Is there a professional model? A professional car mechanic. It is much easier for the after-sale master to cover the car. But it’s annoying. Be careful, and the after-sales master works carefully.
It seems to be a small amount of work, but it is still quite hard to do. Although it felt that the package was in place, it was found that there were still some paint particles attached to the black spoiler in front of the wheel. Fortunately, there are not many, so leave it alone.
The lower part of the wheel eyebrow also has a small amount of scratches, which can be dealt with together, which is simple and quick.
Due to the need to wear gloves in the painting process, and time is tight, there is no painting photo taken. But I would like to briefly introduce the essentials of painting.
First of all, the can paint should be fully mixed before use and shake forcefully for about three minutes. Then test spray on the cardboard. Wait for the paint to dry and compare it with the color of the car body paint.
Second, officially start painting, hand-held tank, about 25 cm from the paint surface, uniform spray, pay attention not to spray too much, horizontal sweep three or four times on it. Don’t try to cover the black part at once. It’s a process.
Third, spray repeatedly until the black part is completely covered.
Second, officially start painting, hand-held tank, about 25 cm from the paint surface, uniform spray, pay attention not to spray too much, horizontal sweep three or four times on it. Don’t try to cover the black part at once. It’s a process.
Third, spray repeatedly until the black part is completely covered.
Do a good job of protection, if you tear open the patch, see the effect. It’s gonna be great.
Positive effect, remember what I said above? Scraping putty is a very important link, otherwise there will be faint pits.
After this repair, I am very happy. I would like to thank the after-sales maintenance master for his hard work. Give them a like!
Finally, after the end of the work of the after-sales maintenance master, it has been proved by facts that the effect is good. To sum up, it is rapid repair, good construction quality, sufficient painting materials, coupled with first-class after-sales technology. So the effect of the repair is good. Hey! But again, I very much enjoy the feeling that the painting process brings to me, an inexplicable sense of achievement, after-sales master can have such a technology so that I admire, this is the result I want. Thank you for watching!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024
Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024
You May Like