How to adjust the headlight lights of Lao Octavia

  9
 September 4, 2024
Record it for later review.
Take the headlight on the front passenger side of the Lao Mingrui as an example. The low beam is composed of three screws and a ball head inside the lamp. There is three points for fixing the headlight lens, and one point on the right side, which cannot be moved. The left side consists of two points: upper and lower. The screw below is connected to a motor, which is controlled by the headlight height adjustment knob. This point can also be manually adjusted when opening the cabin cover. The above point is purely used for opening the cabin cover and for manual adjustment. Facing the headlight, turn it clockwise, and the screw will retreat towards the car, that is, the screw will become shorter, so that the ball head of the screw will stretch outward. For the lens, it causes light to shine on the ground. Several other adjustment points are the same.

Adjust the inner hexagon

high beam

Low beam fixed ball head

Low beam right fixed ball head

Adjustable ball head on the left side of the low beam

Motor adjustment ball joint under left side of low beam

From left to right, high beam, low beam, frame light

Internal adjusting screw