Replacement of the air conditioning filter element for the first time
OliviaNichol 
13 Find a shady place on the weekend, open the passenger driver’s door, lie on the floor, unscrew the 3 screws, easily remove the lower cover plate, withdraw the small light plug and temperature sensor plug, and move the white I-shaped buckle on the air filter towards the main driver. Slide in the direction of the driver, loosen the latch, and pull out the filter element downward. Visually, it is not dirty or smelly. Use a wet towel to reach into the empty box of the filter element, wipe away the layer of floating dust in the box, and install a new filter element. The direction of the arrow is towards the passenger driver’s door, and the I-shaped buckle locks it. Install the upper and lower cover plates, remember the 7-shaped bayonet at the bottom, plug in the corresponding position, plug in the small light and temperature sensor plugs, and finish the project.
front
temperature sensing
thermometer
H-shaped buckle
evaporation box thermometer
evaporation box thermometer
The surface of the evaporation box is not as dirty as imagined, and the detergent is not sprayed to avoid complications.
I can’t understand the date of birth, please advise anyone
Old filter element, not dirty
Compare the new and the old
Go up the new and go down the old
Left old and right new
A layer of floating ash in the filter box
Floating ash, the blower on the left and the evaporation box on the right
Wipe the wet towel clean and stretch it in as far as possible
Xinxin is on duty
Reload.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
