[High 6 manual gear shift lever record]

  9
 September 4, 2024

Four years ago, I missed a German factory handle

There is also soft spray on the panel, but it has aged over time, and it will fall off with a scratch with your nails.

Just scrape it all off

The right half is scraped off, revealing black plastic, which is darker in color

Compared with the original car gear handle, it is exactly the same

I was preparing to open and dismantle the original car’s gear handle. It took nearly 135,000 kilometers to use, and the gear handle head was worn out to a certain extent.

This is a rear-installed clamp. The sponge was replaced before, but it broke again not long after, and then it was pulled directly

Comparison between old and new

The head of the stop handle is worn, but the leather is okay, with a little natural crack

I wanted to use the original plastic frame

The one on the right is the original car, but when compared, the feel of the materials is completely different. The plastic of the original car is thin and feels very fragile. It gives people the feeling that the original car is more like a subsidiary factory part. You can’t see it in the picture, but when compared, you will find the gap!

This is the new German property

The original car is made in Shanghai

When assembling the bottom frame, it’s better to use the German one. The one on the left is new. To be honest, even the leather texture is better, but it’s not real leather!

New self-contained clamps

The pockmarked surface of the metal stop lever is the locking position

The gear shifting mechanism has been greased before, so add it simply this time

Put on the gear handle and align the clamp in place

Clamp directly with nutcrackers, which is equivalent to the original factory

Fasten the plastic frame

The new file is the spirit

Prepare to use another 100,000 kilometers!

The steering wheel is also a little worn, so I’m going to wrap it in real leather in the future!