Summer comes, and we will carry out a seat maintenance for Xiaolang

  4
 September 4, 2024
Introduction to basic information of the vehicle model:
Model: LaVida PLUS2018
Purchase time: August 5, 2018
mileage traveled: 45000 kilometers
Main purpose: Long-distance travel between hometown and work
Seat material: leather
Seat status: partially aging and yellowing, with stains in many places
The interior of a car will easily change color after being used for a long time, aging and dirt, etc. The interior of leather is more likely to cause aging and cracking. Whether it is leather or artificial leather, this kind of problem will occur. In serious cases, it may even be moldy and smelly, so it is best to clean and maintain the interior of leather once a year. A few days ago, a rider recommended this leather cleaner from Gootway, which has a two-in-one cleaning and maintenance function, with two effects in one operation. Cleaning is also maintained at the same time. The surface is polished to prevent cracking, and some stains can also be cleaned.
Operation process: The car is the LaVida 2018 LaVida PLUS. It was purchased in July 2018. It has been nearly five years since I bought the car. I have always washed the car myself due to lack of money. Usually, most of the time I wash the car, I only simply wash the outside. Less internal cleaning is done, and the leather seats have not been maintained. For so long, the seats have been sweating a lot in summer. In winter, due to the dry weather, the leather is easy to crack, and there are many bacteria in spring. It is necessary to carry out comprehensive and meticulous maintenance of the seat.
One: First use a towel to dispose of the floating dust on the seat, then shake the interior cleaner up and down vigorously to fully exert the best cleaning effect, then spray it evenly, and wait for 2-3 minutes for the foam to fully soak. The leather part of the seat should be fully sprayed in place, and be careful not to spray it on the wind, as the wind will blow foam onto your face.
2. Use a small brush to rotate the brush clockwise to allow the foam to fully penetrate into the leather. Curing agents have a certain protective effect on leather. In addition to cleaning, they also prevent drying. At this time, it is necessary to remind everyone not to use too much force and moderate it; otherwise, the leather may be damaged, which will be troublesome.
Three: After brushing, use a towel to wipe off the excess foam. Then look at the leather seat. It is as bright as new. The effect is still OK.
Notes: Because compressed air is canned, it cannot be placed in the car to prevent safety hazards caused by high temperatures in summer. It needs to be placed in a cool place for storage.
Experience: Doing it yourself is very happy and a sense of gain. Only by doing it yourself can you have the sense of participation when raising a car. This is the life of a person and a car!