[Golf 6 Sews your own steering wheel cover]
LeoBruce 
11 
The steering wheel of the original car, which lasted more than 140,000 kilometers, was seriously worn out
I bought an original steering wheel cover and prepared to sew it myself
The packaging looks pretty good
The leather is okay, there is no peculiar smell
Install the tutorial, it’s best to watch the video several times
Record the original steering wheel
Original factory routing
At the back seam, compare the details when the seam is finished
It was difficult to plug the seam on the car, so I decided to remove it and sew it later.
This is a photo of the airbag removed before
This is the fixing screws removed
Fixing screws with anti-loosening glue
After removing the steering wheel
Kind of racing.
The original car leather last memorial
back
Put it in the right position
The edge of the steering wheel sleeve at 6 o’clock is not thinned, so it is difficult to plug, so it is difficult to make it perfect without removing the steering wheel!
The bottom half is sewn up
There is no skipping needle when sewing when the needle is sewn. The original factory is sewn with skipping needle.
It’s done. It can be said to be perfect.
details show
The corners are stuffed in place
Same as the original factory
ready to install
airbag horn
Wiring harness number
ready to get on the bus
The steering wheel is not aimed at the center point because the steering wheel was a little left when driving straight before, so the steering wheel is just right when installed!
Install screws
Installation completed, same as original factory
comparison chart
details
The back seam is tighter than the original one
It’s like driving a new car!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
