[Show] Today, we started to replace the car with a new “mask”(Ma Liu Replacement Air Filter Tutorial)
DonnaAugustine 
8 My Mazda 6 is a 2.0- 6MT produced on July 12, 2010. It is pearlescent black. It has accompanied me through 120,000 kilometers of road. It has a kind site and suspension, and has never had any problems.
Of course, as an old car owner, especially one who has certain hands-on skills, I can also handle some small problems myself, such as replacing the wiper strips, removing the rear seats to install seat cushions, poor contact with the reversing radar lines, removing the front air intake grille, installing protective nets, etc., replacing the air filter and air filter is not a problem.
Zhou Tian had nothing to do at home, so he thought it was time to replace the air conditioning filter element for the car and change the mask to make the car fresher.
The air conditioning filter element was purchased from the original factory at a 4S store. It looks very neat and the quality should be good.
The air conditioning filter element of the Mazda 6 is on the inside of the glove box in front of the co-pilot. After opening it, the glove box should be put down to expose the operating surface inside. Pull down the baffle of the air conditioning filter element, pull out the original air conditioning filter element, insert the new filter element in the specified direction, and fasten the baffle., return to the glove box, and thus complete the replacement work.
The replacement went smoothly today. It was completed in a few minutes. I drove out for a walk to check the effect.
After changing the “mask” and feeling the fresh air, this is not a psychological effect, is it![]()
![]()
![]()
Of course, as an old car owner, especially one who has certain hands-on skills, I can also handle some small problems myself, such as replacing the wiper strips, removing the rear seats to install seat cushions, poor contact with the reversing radar lines, removing the front air intake grille, installing protective nets, etc., replacing the air filter and air filter is not a problem.
Zhou Tian had nothing to do at home, so he thought it was time to replace the air conditioning filter element for the car and change the mask to make the car fresher.
The air conditioning filter element was purchased from the original factory at a 4S store. It looks very neat and the quality should be good.
The air conditioning filter element of the Mazda 6 is on the inside of the glove box in front of the co-pilot. After opening it, the glove box should be put down to expose the operating surface inside. Pull down the baffle of the air conditioning filter element, pull out the original air conditioning filter element, insert the new filter element in the specified direction, and fasten the baffle., return to the glove box, and thus complete the replacement work.
The replacement went smoothly today. It was completed in a few minutes. I drove out for a walk to check the effect.
After changing the “mask” and feeling the fresh air, this is not a psychological effect, is it
Original parts are no longer available, and they are even more precious out of print
Dense logos on the back of the box
Open the box and show your true appearance
It comes with installation instructions, which is very considerate
I don’t even need to look, I have all the craftsmanship in my heart
Installation direction warning arrow on side of filter element
The interior of Ma Liu is very simple, reaching the glove box position
Open the glove box and place it naturally to the bottom. Pay attention to the rubber limit lever in the center of the picture
The lower end of the rubber limit lever has a circular structure, which is sleeved on the cylinder on the side of the glove box. After opening the glove box, it plays a limit role and has a damping effect.
Move the limit pull to the left, and the glove box loses its limit.
There is a button on both sides of the glove box body. The button is black in the center of the figure. The box plates on both sides of the glove box are soft and can deform to a certain extent. Pull it inward with your hand and continue to flip the glove box downward to open it smoothly.
After the glove box is fully opened and turned out, the air conditioning filter baffle is exposed
Give a close-up of the air conditioning filter baffle
The baffle can be deformed and taken down with a gentle push, exposing the air conditioning filter element
Only by comparing the old and the new can we know the gap
This is the state where the air conditioning filter element is not installed
Insert a new air conditioning filter element in the direction prompted
Push and move a few times into place
Fasten on the air conditioning filter element baffle
The dust on the box board in the glove box couldn’t be wiped off normally, but now I wiped it off easily
Push button lightly, carry
Clamp on rubber limit pull rod
The “mask” has been replaced and the glove box is in place
Start to test the effect and go to the street
After changing the “mask” and feeling the fresh air, this is not a psychological effect, is it
A row of down-to-earth restaurants, Xincun District 6
“End”
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
