waterproofing operation

  4
 September 4, 2024
2024.4.29 Waterproof operation of the large Picasso skylight.

Water stains that have appeared after rain in recent days

Remove the buckle strip at the middle of the sunroof with a small plastic crowbar

After tearing open, you can see this rubber plug buried in the dusty desert

Let’s take a long view

It’s it, it’s it, it’s it-it’s aging

Photo of the buckle strip. Aluminum alloy material.

The small air pump prepared in advance will be used later-blow and blow and blow

Blow and blow…

What blows away is not ordinary soil, it is a 15-year collection of soil. I did not cherish it, and I will not regret it too late…

It’s clean. It can be seen that the edge of this plug is missing due to aging.

Remove the aging plug. This is where the water enters inside.

Seal it with glue. What I like: high adhesion, high flexibility, and little change in performance from-40° to 150° after curing.

It doesn’t take much, but it’s blocked.

Afraid that the seal would not be tight, I simply had more area to make it safer and ignore the appearance.

Give a long vision. So that the work on this side is completed.

This is the half-aged rubber plug with the sunroof buckle removed on the other side.

What it looks like after blowing and blowing

Seal with glue

Give a long vision.

Photo of the buckle strip.

Xiaoyu also came to join in the fun.

Let the storm come harder.

The whole journey takes one hour for one person. If it happens again, it will not exceed half an hour. Of course, there should be no ifs. I would like to express my special thanks to the small owner and drivers of Bodhi for their aerial technical support.

Recommended Suppliers