Have any riders replaced the intake manifold servo motor?_vehicles, vehicles

Have any riders replaced the intake manifold servo motor?

September 4, 2024

Last time, I found that the oil was a little short, and there was no blue smoke in the exhaust pipe. It felt like it was not burning oil. After returning, I opened the engine compartment and found that there were oil traces in the valve cover chamber. It should be that the valve cover chamber gasket and spark plug gasket were aging. Last week, I went to Auto Parts City to replace the valve cover chamber cushion. I found that the right front shock absorber also leaked oil, so I replaced it together. The boss suggested that the thermostat should be replaced as well. I think I should replace it. After all, I have been using it for several years, and there was a warning that the water temperature was low some time ago. I still need to replace it with worry. By the way, I replaced the sealing ring of a pipe in the turbocharger. The pipe had been replaced by 4S a few years ago, and the rubber parts had aged again. The boss charged 50 yuan for a 5- 6mm sealing ring, but he didn’t bother with him. After all, it costs several hundred yuan to replace a pipe in 4S.
The shock absorber is 1600, the thermostat is 650, the valve cover chamber pad is 650, and two small owls are 230*2. Anyway, the total is 3,360.00 yuan. They are basically not original factory parts. Although the shock absorber has the label of imported parts, I feel that it is still a fake. But given that the left front shock absorber was replaced a few years ago, it was fine for nearly 100,000 kilometers.

The spring of the thermostat was stuck inside. Fortunately, it was replaced. Otherwise, it would have broken down on the road, which would have made it even more troublesome.