#Looking for a C-position service experience officer #Fengshen AX7 maintenance chassis inspection
TobyHicks 
10 In the blink of an eye, my car Fengshen AX7 has been maintained for the fourth time. Time flies so quickly. The content of this maintenance is still very simple, but the process is very detailed. I like this service process very much. Even if I simply change the oil and filter, I don’t miss any of the other items that need to be inspected. This attitude is very correct and deserves praise.
Check the front section
Put on a red hijab and celebrate
Lay a protective film and work cleanly.
The car is rising to the sky
I’m going to lift it high
Here we are, we have begun to focus on inspections. The first is a routine inspection of a tire, tire pressure inspection, pattern wear, and whether the tread has nails.
Inspections such as vehicle suspension supports were inspected everywhere
In the chassis inspection section, this car is the chassis of an old Japanese car, so after I got the car, I made another layer of chassis armor. After all, my driving environment is harsh after all, so I have more protection and I feel more at ease. As shown in the picture, the black and hard layer of resin is very solid. There are some slight stone splashing scratches on the entire chassis, but fortunately it is protected by this layer of resin. There is slight rust at the interface of the exhaust gas emission pipe, at almost every section. I can’t help it. It should be a wearing part.
The overall feeling is good. Although the little brother is relatively young, the service is also very serious. Give me a thumbs up!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
