plug a hole_vehicles, vehicles

plug a hole

September 5, 2024

Although there is nothing to do with the car and there is less driving, I still look around when I have nothing to do.

Found an oval hole on the inside of each of the two front wheels
This hole is actually used by foreign models equipped with DCC shock absorbers for wearing DCC wiring harnesses. Imported domestic models do not have this configuration, so it is empty.
I don’t know why I didn’t use a rubber plug to plug it up. It would be easier for muddy water to enter the engine compartment through this hole, but it would not be so good if winter ice and snow were added with snow melting agent.
I think plugging this hole should do more harm than harm

I used a caliper to measure the size, and bought the rubber plug back, and I bought several

very suitable

Put one on the cover.

There is still a hole on the inside of the right front wheel, which has to be plugged

The original car was blocked by rubber on the left front wheel. I wonder why the right side was not blocked. Maybe it fell off?

Because there is a pipe, a hole has to be made when plugging the rubber. The hole was opened by visual inspection

a successful

Looking from inside the engine compartment

The extra glue plugs I bought are used here
These two holes are used to facilitate the use of tools. It doesn’t matter whether they are plugged, but they are beneficial and harmless.