Replace the cover brace
HoganWodehous 
10 The hydraulic support rod for the engine cover of Sharan’s original car was imported from the Stepirus brand. I have been driving this car for four years, and this thing is a little weak. It’s not as good as my Touan’s domestic Stepirus hood pole. It took me ten years to replace it.
I often open and close the mechanism cover, so this thing has to be replaced. Students who don’t really open and close the mechanism cover can ignore it…
I searched online and found that all imported ones were more than 200 pieces each, so I still bought domestic ones. Steppius has a factory in China and a flagship store online. The ones suitable for Sharan only cost about 100 yuan.
I searched online and found that all imported ones were more than 200 pieces each, so I still bought domestic ones. Steppius has a factory in China and a flagship store online. The ones suitable for Sharan only cost about 100 yuan.
Domestic Stylus, made in China
It’s easy to replace this thing. The tool only needs a small screwdriver. You have to pick up the clamp first. Be careful not to get rid of it. If it drops, it will take a lot of time to install it.
After installing it, press the clamp in place and it will be OK
The replacement was completed in three minutes, and the support was much stronger and perfect.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
