Do-it-yourself middle maintenance engine booster pump generator whole vehicle water pipes

  13
 September 5, 2024
Learn to charge in the forum first. Take advantage of the weather in the past few days. The temperature will soon drop to minus zero in three days. Hurry up and open it up and dismantle it all together. We must completely eradicate a little oil, float the booster pump, leak leaks, warm air pipes are almost out. Power generation is unstable when the generator is idle, etc.

It’s difficult to pull on the plug

The turtle shell has been removed

Remove this heating water pipe before removing the turtle shell

Remove the fuel pipe with a tool

The booster pump can be moved by removing the three screws of the booster pump

Remove three screws from the booster pump

Slowly pull out the fuel rail injector

Three of the six screws at both ends of the jumper exhaust pipe have been removed, so I am very careful to buy a new one and replace it!

Remove the booster pump generator and make it easy to remove

Warm water pipes must be photographed, and new water pipes must be replaced.

The water pipes of the original car that was delivered in 2009 are almost exhausted, so we can change them casually.

The oil inside the turtle shell is a little emulsified

rocker arm tappet

12 rocker screws

8 screws on the cylinder head

Two cylinder heads

six piston

camshaft sensor

The three links from the original car are already fragile

Real copper pipe

2 The plug-in generator was replaced with a new one in 2018

Oxygen sensor plug power generation air pressure

The regulator needs to be removed later and checked the carbon brushes

Three screws need to be disassembled

Ignition module coil

It’s dark and it’s a day when I get off work and go to the garage