2015 model modified e200 replacement license plate light_vehicles, vehicles

2015 model modified e200 replacement license plate light

September 5, 2024

The two rear license plate lights have been out of order for some time, and they have to replace them when they have time recently. After reading the article recommended by Yan Edition, the riders have already explained it in great detail. If it is a license plate lamp like an old light bulb, you don’t have to remove so much and replace the lamp beads directly. I modified the 15 model. The original car is an LED license plate lamp, so all must be taken out and replaced. Let’s not talk about the previous steps. They are included in the posts recommended by Yan Edition. Let me add more. 1. The tailbox button switch must be removed after removing the tailbox lining. There are two internal hexagonal screws, which are difficult to operate due to the small space. 2. After removing the switch, remove the gusset plate. I don’t know what it will use, and it will not affect it if it is not installed. 3. Remove the black guard plate above the license plate. 4. Reach in, feel the plug on the license plate light, and unplug it. 5. Press and hold the license plate light on both sides and push it outward. After the new lights are installed, the original road will be restored. At first, I didn’t know that I had to remove the tailbox switch, so I pushed up the guard plate of the license plate light hard, and many small buckles were broken, but it did not affect the use. The big buckles could not be broken and were very strong.