Don’t delay the trouble even if you lie flat, and replace the three-piece set with a new one!

  2
 September 5, 2024
It has been 5 years since the last time the foot glue was replaced, and coupled with the low temperatures in the north these few days, the engine is dancing happily again! At this juncture of large-scale opening and closing, you can’t sit idle even if you lie down and help the 4s shop resume work and increase efficiency!

On weekdays, this is the busiest 4s shop in the east of Beijing. Every time I come, it is crowded with people. Because of its good location and its long history of operation, the customer flow is quite large. The experience of the maintenance technicians has been accumulated so rich. Today, this young master is still very good at his work. He has applied torque and angle according to the standard. This is the key factor why I chose to come here. He has complete tools and is reliable!

The outer packaging of the engine foot glue is now in plain cartons, and the origin of origin in Spain is also worthy of the price of 1,000 yuan each.

This is an old foot that has been in service for 5 years. It doesn’t seem to have any problems. It should be that the material has aged, and no problems such as oil leaks have been found.

It looks quite new from the side.

After five years of service through ups and downs, my mission was finally completed.

The rubber underneath is soft when pressed, and there seems to be ointment inside. There is no damage or leakage.

Old gearbox support, this product is made in India, and the new one is also made in India.

There is no collapse when viewed from the side.

Four screw holes connected to the Yuanbao beam at the bottom.

Because I didn’t go to the store designated by the Zhiyou Project, the repair cost this time is the original price.

Screenshots during forum study, gearbox support replacement steps and data are convenient for audience members to quickly obtain.

For friends to quickly access.

Recommended Suppliers