[Show] Before summer travel-Intake port and throttle cleaning and brake fluid replacement
AudreyKennan 
9 Before traveling, it is particularly important to ensure the safety of vehicles. The performance of the car must be ensured in a normal and healthy state.
Recently, I have been feeling that the braking distance is getting longer, and the force and depth of stepping on the brake before red lights have increased. I went to the store for safety reasons.
During the last maintenance, I said that the throttle was a little dirty. This time I went to the store and planned to clean the intake port and the throttle together.
The main function of engine intake port cleaning is to clean up carbon deposits and dirt in the intake port. The functions are:
1. Improve the environment of the intake port to make the engine idling more stable.
2. Improve combustion and reduce fuel consumption.
3. Extend the service life of the intake port.
The function of throttle cleaning is to clean up carbon deposits and dirt inside the throttle.
The function of the throttle is to control the opening and closing of the valve and control the speed of the engine.
If carbon deposits and dirt appear inside the throttle valve, it will cause the throttle valve to fail to open or close normally, thus affecting the performance and efficiency of the engine.
Throttle cleaning can help ensure the normal operation of the engine and improve fuel consumption and acceleration performance.
Let the engine idle for more than 20 minutes, and then slam the throttle to clean up carbon deposits and dirt.
At first I thought the brake pads were getting thinner, but after inspection, they were still very thick!
I said, then check the water content of the brake fluid!
Sure enough, the red light was on and the water content exceeded the standard.
The sudden braking of ABS made me a little distressed.
The braking problem is solved!
see Figure below
April 1, 2024
March 27, 2024 
March 27, 2024 
