As the former owner of the W204 V6 King, after putting into the environmental protection of JLR and CJLR in October 2018, I did not forget the friends of Mercedes-Benz C. although they were transferred from Aika’s Mercedes-Benz C Forum, they still occasionally recommended (recommended) colleagues and partners to buy Mercedes products. Especially the entry-level rear drive of Beijing Mercedes-Benz with strong product power. In fact, compared with the popular proverb, I think the only thing that can not be avoided in life is a C-class, even if it is complained that the displacement of 1.5T is small, but the acceptance of the market proves it all. I hope everyone likes their cars better and leave more time for them.
My partner got a 4-digit suggested maintenance list after 4S inspection, forwarded it to me, and asked me shyly, my car is old, and it just cost a lot of money to repair the gearbox. Can you save some money if you don’t change it in 4S? But I saw Baidu, many people said it was very difficult, brother will not ah?
So I contacted the old guy in Auto parts City on Wechat and sent me two air conditioner filters. 4s said one. Just let me change them for you. Let’s see if I want to change them. There’s no need for labor. Just buy me dinner! Ha ha ha ha
The PM2.5 filter element in the car begins with the first-stage dust filter element in the engine room.
Don’t think I’m rough. JD.com Express went downstairs to operate. Look at the position and change the cabin filter first.
The gray area behind the vacancy is relatively large, and so on, drive past the gray area to change, here the owner picture up and down the elevator is close, the co-driver door distance is too close to operate the replacement of the filter element in the car.
Open the cabin and the hospitality of parking on the ground is coming.
Let’s get to work! Turn the plastic twist
Turn the second plastic twist and complete the disassembly in 10 seconds.
Open the co-pilot’s side cover, and the box in the distance is the installation position of the engine room filter.
Gently pinch it off!
There is a lot of dust and pollen visually.
Hands are also dirty, it is recommended that you prepare 2 disposable gloves, one pair of inside and then outside the car, change the gloves and install them inside and outside the car.
By comparison, there is a big gap. According to the maintenance record, it has not been replaced for one year.
Wipe your dirty hands clean and start the installation
Press leveling, buckle back.
Recover and clean up the leaves.
The 2018 Beijing Mercedes-Benz C200L sports version 2.0 turbocharged engine with a gearbox was repaired last year for 29000 of the 4S asking price, and finally the owner went to the repair shop 17000 to fix the problem. I didn’t ask any more about the specific situation. The mileage is almost 65000 kilometers. I can’t get into 12 gears.
Drive to a spacious place and take out the tools to accompany me for 10 years. T25 is the most frequently used by me to dismantle the Jaguar Land Rover air filter box. I did not expect that the air-conditioning filter element in the W205 FL1 is the spline of T20, with only one screw. Open! Take it in five seconds.
Take the lid and pull it down. because you see the light with the foot socket lamp, it must be a cable harness plug, so it is removed more carefully. Finally, there is a plug co-pilot in the middle and there is a sensor that needs to be rotated 90 degrees on the corner near the central channel. I didn’t take a picture because I groped for it. When I picked it up and loaded it back, I took a picture for your reference.
Take a look at this green circle should be the sealing ring of the air filter element, this design is the same as the 2009-2015 Jaguar XF, across the space on the right side of the place, the air-conditioning filter element can be seen.
After digging for a few times, the left side will touch the central channel a little bit. Pinch the old one and come down! Hey, hey, is it dirty? it is said that it has not been changed for 2 years.
Take out the new air conditioner filter element, remove the package directly and install it according to the direction of removal (air flow).
Just tuck the new one back at the same angle and press it flat. It won’t fall off.
Lie upside down on the co-driver’s carpet, one hand at the sealing ring position, one hand to the left, and the installation is complete.
Plug the foot socket lamp into the sensor and rotate it to the lower guard plate.
When you put it back in, pay attention to the left side and then shoot it up. After the screw hole is in place, the position of the screw hole and the position on the left near the central channel are flat. There can be no bumps.
Screw up the screws, and then spread the floor mats. Finish it!
The whole journey takes 15 minutes, and you can get a good meal tomorrow.
I hope everyone can learn to save at least 800 yuan!
NoelAmelia 
6 
September 5, 2024 
