Tuyue daily inspection
Xiao Yueyue has become a second guarantee. At present, it is still very comfortable to use! Xiao Yueyue is atmospheric and has enough space. He was chosen because he had a strong atmosphere and a high chassis, and there was no major problem in dealing with general domestic road conditions.
Winter is here. Although it is in the south and the temperature will not fall below zero degrees Celsius, comparative inspections still need to be done. After all, safety comes first. So why don’t you just do a simple inspection yourself for reference by motorists. The main thing is to check coolant, brake fluid, engine oil, and glass water. Let’s check item by item.
First of all, there is this mark below the main driver’s side. After finding it, it gently pulls it out. When you hear a clang, it will be the first lock to open the cabin cover!
You can open the second lock by gently breaking it on the web with your fingers!
This is the support pole. Pick it up and prepare to support the cover!
It’s stuck in this place!
Check the coolant first! The red one is obviously between MIN and MAX and is in line with the standard. Pay attention to observe that if there is insufficient coolant, the engine will easily pull the cylinder at high temperatures!
Look at the brake fluid, it is not below the minimum scale! You must check this carefully. If there is insufficient brake fluid, there will be problems with the brakes!
This is a glass water cover! Gently pull it up to open it!
What it looks like after opening it
You can use this effervescent tablet to make glass water in the south, which is convenient and quick! Remember that the ambient temperature must be above 0℃! You must buy special glass water in winter in the north! Otherwise, it will freeze and burst the glass water tank!
Pick up the filter
Add effervescent tablets
Replace the filter
add water
Don’t be too full, leave some space!
close the lid
After 10 minutes, the effervescent tablet dissolves and it is blue glass water above 0 degrees Celsius!
Open the oil cap
was clean
The area around the oil port is dirty, wipe it with a clean tissue! Be careful not to rub it inside to avoid dirt entering!
Clean it up
The oil cap is also dirty
wiped clean
close the lid
Pull up the oil dipstick
Wipe it with a clean tissue
Put in again
Obviously the oil is between the height of the oil gauge
After putting away the support pole, gently put down the cover, and then press down hard to lock it! Don’t throw the lock cover off directly, take good care of your own car!
This inspection is over! Learn some knowledge and use your own car safely
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024
Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024
You May Like