One trick teaches you how to cleverly solve the situation of stuck seat belts_vehicles, vehicles

One trick teaches you how to cleverly solve the situation of stuck seat belts

September 5, 2024

Foreword:
Seat belts are on-board safety devices that are used frequently. Although seat belts are inconspicuous, they are the most important safety equipment. Correct use of seat belts can avoid 60% of casualties. Therefore, the use of seat belts cannot be ignored.

Safe driving is very important

Text:
My Tiguan Silk Road has been in use for 4 years. But now I don’t know what the situation is now. Every time after the driver’s seat belt is loosened, the seat belt can never be retracted automatically. The long support often falls outside the door and affects the door closing. It will more seriously affect the normal use of seat belts. I think this will not be a problem with the seat belt retractor, mainly because dust on the surface of the seat belt enters the seat belt retractor after long-term use. The retractor lacks lubrication, causing the seat belt storage card to stagnate and cannot be automatically returned.

My Tiguan

Seat belt does not retract automatically

So how to solve it?
If you use oil directly for lubrication, it will stain your seat belts and clothes. If the seat belt retractor is disassembled and lubricated with oil, it may destroy the use of the seat belt retractor. This method is too risky, so never remove the original safety equipment at will. After comparing and trying various methods, it was found that the effect of spraying plastic glue protectant directly into the seat belt retractor box was very good.
The detailed operation process is as follows:
First of all, buy a bottle of plastic glue protectant. This protectant has no peculiar smell and oil stains. It has a very good lubrication and dust protection effect.
Then directly insert the nozzle into the seat belt retractor box, spray it inside and pull the seat belt to fully absorb the lubrication until the seat belt can be retracted and retracted freely and automatically tightened.
Then insert sprinkler irrigation into the card slot of the safety head and spray it into it to lubricate it as well. Insert the seat belt into it and test for flexibility and you’re done.
Finally, check both front and rear seat belts according to this operation method. This can be done when spraying into the front and rear seat belts. Plastic protectants prevent dust from adhering to the surface of the seat belt and being brought into the retractor, and can achieve lubrication. Remember to spray it on the seat belt retractor box and the seat belt clip slot. Try not to spray it on the seat belt surface, because the seat belt will be slippery when sprayed on the seat belt surface and affect the wearing of the seat belt.