Method for adjusting the water spray direction of wiper
JasonDeQuincey 
9 I didn’t check the wiper when I came back from buying a car. I had always had a problem with the height of the water spray. I never could spray water on it. I thought this was the case. If the wipers couldn’t spray water, they would easily break down, which directly led me to replace several sets of wipers. During this time, I discovered that the original ones could adjust the direction. I was really drunk. I bought several sets of wipers. I said how to break down so quickly, let’s teach you how to adjust it.
First you have to prepare a pin
Don’t make the tip of the needle too thin, otherwise it will be easy to break and it will be awkward if it breaks inside.
Look at the height of the water spray, it’s seriously paralyzed.
You can’t spray it at all
The co-pilot is good. Every time, he borrows water from the co-pilot and borrows it from the main driver.
Look at the top. You can’t spray it at all.
Start adjusting, first find the spray holes, these three small holes
Get the pins ready.
Insert the first hole and start adjusting
the second
Damn it, spray it too high, reset it.
This is great. Look at the effect. It’s perfect.
That’s a lot of water. I finally don’t have to borrow water from the co-pilot.
Look inside and see the effect, isn’t it good?
Just the right height
This way it’s clean and comfortable
How cool and clean it is. If you also have these problems, hurry up and solve them
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
