Windshield, teach you a rain-proof trick
AbnerWyclif 
12 May has entered spring, and the weather has changed. You can’t understand the weather in Sichuan. Thunderstorms occur every few days, and vehicles also travel in the wind and rain. Especially when driving, sudden heavy rain affects the driving line of sight and makes us drivers always drive in danger. There are certain safety hazards because the rainfall is too large. When we use the wiper to clear the windshield rainwater, because the speed of the rain guard cannot clear the rainwater in time, it will also bring safety hazards to our drivers! So today, I took the time to coat the front windshield, rearview mirror, and rear windshield of the vehicle with rain-proof coating. The following will share the rain-proof coating process with everyone.
Let’s solve the first question first. Where should rainproof be used? It is mainly used on the front and rear windshields and left and right rearview mirrors of cars. It is mainly used to make a layer of waterproof coating treatment with a rainproof coating agent. A special protective film will be formed on the coated glass, so that rainwater cannot adhere to the surface and plays a certain role in driving water. When the car is driving at high speed, water droplets will automatically flow away due to inertia and wind force, and can quickly and effectively prevent the fog on the vehicle windshield from regaining. When the rainfall is small, Even if we don’t turn on the wipers, it won’t affect our driving.
To start work, the first step is to turn on the wiper.
The second step is to wipe the glass clean with a wet towel to ensure that there are no stains and oil stains.
The third step is to wipe the glass with a dry towel and dry the water stains to ensure that there are no residual water droplets, otherwise the effect of the coating agent will be affected.
The fourth step is to manually shake the rainproof agent and evenly spray it on the glass surface.
The effect after spraying.
The effect of coating the front and rear windshields with waterproof agent. You can see from the glass that after the glass is covered with a layer of rainproof agent, it will show a foggy feeling. The rear windshield is sprayed too much, and you have already seen flowing traces. Everyone only needs to cover the glass surface with a thin layer when spraying.
Wait a moment, when the rainproof agent on the glass dries a little, wipe it evenly with a clean towel until the window glass is clean and transparent.
I have coated car paint before, and this is also the first time I have used a rainproof agent to coat. Based on my previous experience in car paint coating, do not wash it with rainwater within half an hour after coating the waterproof agent to avoid damaging the protective layer of the waterproof agent coating. This waterproof agent coating sharing is over. I hope it will rain tomorrow so that I can test the effect of the waterproof agent coating.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
