Do it yourself for small things: replacing the trunk light bulb
AnselDutt 
8 
My car is 2018 Lang Yi large cup Lang Yi Plus, originally the whole car is standard with LED lights, I do not know why the trunk lights are halogen, maybe it is to control the cost. I look for something in the trunk every night, and to be honest, this lamp is not as bright as a candle. Opening the trunk to find something in the dim yellow light is basically blind.
A few days ago, I saw that the trunk of the forum had changed the LED light, and said that the effect was good, so I found the post and studied it carefully to see that it was very simple to start. At the same time, it was also in order to make the trunk lighting brighter and easier to find things, so I checked the trunk LED lights on the shopping network and asked the boss for the model, so I was ready to change it myself.
It just so happens that the weather is fine, and the temperature of the sun has reached more than 20 degrees. I happen to be free at noon, so change the lamp as soon as possible. (the light bulb has been bought for some time) Let’s first compare the results after completion, and then unfold the process later. LED is white and halogen bulbs are yellow.
Let’s take a picture of unpacking. There are complimentary crowbar and LED lights in the packing box.
Now let me tell you about the process of replacement.
First open the trunk, the original car comes with halogen trunk lights, the light is yellow, the color is very dim.
Because there is no switch in the trunk light, I first use the pry board to press down the lock tongue (equivalent to turning off the power supply on the trunk lock, if you operate with electricity, the halogen light bulb will be hot and will burn your fingers accidentally)
Because there is no switch in the trunk light, I first use the pry board to press down the lock tongue (equivalent to turning off the power supply on the trunk lock, if you operate with electricity, the halogen light bulb will be hot and will burn your fingers accidentally)
Slowly insert the crowbar into the trunk lampshade (there is a gap on the right, insert from the gap, convenient, work) slowly tilt the trunk lamp.
After turning aside, pull the trunk light with your hand and remove it.
The trunk light is connected to the black plastic clasp of the power cord.
The trunk light is connected to the black plastic clasp of the power cord.
Press the buckle with your hand and pull it out, and the black clip is separated from the lamp holder of the trunk. Can not use brute force, pull off the line, trouble, clasp to press in, and then gently pull off.
When the lamp holder is removed, the halogen bulb is stuck with a card holder, and the halogen bulb is stuck and secured by two pairs of iron sheets.
There is a reflector on the lamp holder to reflect the light to the trunk to increase the brightness of the light.
After observing the structure of the lamp holder, then disassemble the light bulb, gently push it toward the opening of the card with your finger, and the light bulb will be removed.
Remove the halogen bulb and LED lamp, first take a group photo. The tungsten wire in the halogen bulb is clearly visible. There is a LED lamp bead patch on the front of the LED bulb.
Halogen bulbs are basically the same length as LED bulbs.
Halogen bulbs are basically the same length as LED bulbs.
To begin the installation, slowly push one side of the LED bulb into the clip. (there is no difference between positive and negative poles) press the other end in, it’s as simple as that.
Be careful to gently push so as not to damage the top LED lamp bead patch. (it is important to note here that the side of the LED lamp bead patch is facing the lampshade. When I first installed it, it was toward the reflector. I imagined it was reflected by the reflector and ended up reworking.)
Be careful to gently push so as not to damage the top LED lamp bead patch. (it is important to note here that the side of the LED lamp bead patch is facing the lampshade. When I first installed it, it was toward the reflector. I imagined it was reflected by the reflector and ended up reworking.)
The wrong way to install
Correct installation mode
Plug the cable, insert the buckle into the card holder, hear a gentle “click”, it is inserted in place.
Press the trunk switch with the key, the lock tab pops up the light bulb is powered on, and the LED light is on.
Put the lamp holder back, put one side in first, and then press down gently on the side with shrapnel. Perfect. At the end of changing lights, the effect is very obvious.
Put the lamp holder back, put one side in first, and then press down gently on the side with shrapnel. Perfect. At the end of changing lights, the effect is very obvious.
From then on, the trunk was no longer dark, and it was much easier to find things.
Trunk LED lamp online purchase price of 10 yuan, the replacement of LED bulb operation is also simple, want to change the car can give it a try.
Trunk LED lamp online purchase price of 10 yuan, the replacement of LED bulb operation is also simple, want to change the car can give it a try.
Press the trunk switch with the key, the lock tab pops up the light bulb is powered on, and the LED light is on.
Put the lamp holder back, put one side in first, and then press down gently on the side with shrapnel. Perfect. At the end of changing lights, the effect is very obvious.
From then on, the trunk was no longer dark, and it was much easier to find things.
Trunk LED lamp online purchase price of 10 yuan, the replacement of LED bulb operation is also simple, want to change the car can give it a try.
Trunk LED lamp online purchase price of 10 yuan, the replacement of LED bulb operation is also simple, want to change the car can give it a try.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
