I took time to replace the air filter and air conditioning filter from polo in 2007_vehicles, vehicles

I took time to replace the air filter and air conditioning filter from polo in 2007

September 7, 2024

Goudong 618 bought one unit of engine oil and two units of triple filter during an event (at that time, buying two units after using the voucher was only about 10 yuan more expensive than one unit), but it was never too lazy to change them until yesterday. No matter what filter element it is, replacement mainly consists of three steps: 1. Remove the old filter element;2. Replace it with a new filter element;3. Post it.

1. Air filter element:

Support the hood and loosen the screws. The screws cannot be removed, so just loosen them.

Then lift the screws up on this side, and the four clips behind them will disengage and the cover will turn over:

Comparing the old and new air filters, it can be seen that it should be changed long ago:

Press the new air filter on, flip the cover back, clip the back in place and put on the screws. It’s very strange that the underpants are always exposed in the back left corner:

2. Air conditioning filter element

The air conditioning filter element is located at the knees of the co-driver Zuo Ke. You can remove the cover by pushing the clips on both sides towards the middle:

Then you can pull out the filter element and see what is on the filter element: there is a UFO!

Pull out the filter element and install the new core on the frame:

Then I put it back, and the operating space was limited. I lay horizontally in the front row and completed the scheduled movement from my head to the foot pad.
There is a mechanism on the frame, and the mechanism is placed below. When it is lifted up, it is in place: