Gti 5 generation ea113 engine health care replacement valve oil seal solution

  4
 September 8, 2024
The gti 5 generation was hard to have a car back then. Without this love, they would not have bought this car. The feelings are still the same, and I miss it all second-hand.
However, there are always many old problems in the car, and the old problems are always burning oil
I originally wanted to simply replace the valve oil seal, but I thought I’d better do a major inspection on the old car.
Opening the cylinder inspection, the valve oil seals in the three cylinders failed. It was found that the piston and cylinder body were the big problems. The clearance was too large, and the valve oil seals needed to be replaced. The engine probably had to insert cylinder liners, replace piston rings and other overhaul kits.

I also found that the timing kit was not professionally replaced in a shop last time. The water pump was not replaced. When I took it apart, it was cracked. Fortunately, this repair found that

The engine’s coming off

remove turbine

Oil seal leaks

The water pump is cracked, and the picture is unclear

dismantling

The oil at the valve can be understood at a glance

Start replacing valve oil seals

You need to pay attention to installing it back. Special tools are needed, otherwise the camshaft will be in trouble.

The chain and tensioner have also been changed

Put it back on, perfect

Recommended Suppliers