Do it yourself and replace car air filter and air conditioning filter elements
RonBartlett 
8 It has been 13,000 kilometers since the last replacement. Because most of the cars are driven in the urban area, the replacement is not so diligent.
Preparation materials: New air conditioning filter, electric screwdriver, manual cross and linear screwdriver, hexagonal screwdriver, towel, flashlight (can be ignored outdoors, garage lighting is necessary)
Open the hood and you can see that there is still a lot of dust on the generator cover
Use electric tools to screw off all screws on the engine cover. Be careful not to fall into the cabin. It will be difficult to find if they fall in.
Comparing the old and new filter elements, you can see that the old filter element is still very dirty.
Put the new filter element in it
Screw one by one
When screwing, I like to start from the middle first for easy fixing.
After everything is installed, use a towel to clean the generator cover, and you’re done!
Next, change the air conditioning filter element
There is only one screw in this place, and you must use a hexagonal screwdriver.
Remove the cover plate and you will see the filter element
Take it out and replace it with a new filter element
Wipe the inside with a towel
Install the filter element fixing cover, and finally the air conditioning filter element is completed
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
