A maintenance operation for DS5LS
GillCarter 
7 Model: DS5LS 1.6T Mileage: 56470km
Maintenance items: Circularly replace brake fluid, replace left and right front triangular arm bushings, and replace valve cover pads.
Maintenance materials: 2 bottles of ATE SL6 brake fluid, 4 triangular arm bushings from original factory parts, and 1 large and 2 small valve cover pads from imported parts.
Maintenance items: Circularly replace brake fluid, replace left and right front triangular arm bushings, and replace valve cover pads.
Maintenance materials: 2 bottles of ATE SL6 brake fluid, 4 triangular arm bushings from original factory parts, and 1 large and 2 small valve cover pads from imported parts.
Enter the workstation and prepare for maintenance operations.
Milometer.
Maintain project materials.
Oil leakage on the surface of the valve cover is obvious.
The valve cover gasket is being replaced.
Place the tire on the tire rack.
Dedicated brake fluid circulation replacement equipment.
The equipment connector is connected to the brake cylinder.
Start replacing brake fluid.
Below is a picture of the aging of the front delta arm bushing.
Use professional tools to remove the triangular arm assembly.
Professional tools remove and replace the triangular arm bushing.
Comparison chart between old and new.
Comparison chart between old and new.
Install the triangular arm assembly.
Install the valve cover assembly after the engine cools down.
The torque wrench is preset to 90N.
Finally, use a torque wrench to install the wheel.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
