Volvo s90 glass water addition process_vehicles, vehicles

Volvo s90 glass water addition process

September 9, 2024

Two days ago, there was no glass water in the car again. The meter on the Volvo s90 warned that the glass water level was low and had not been managed for several days. Later, it was snowing, to be precise, sleet…
I felt that the liquid level was low. In the future, I used a lot of glass water again and couldn’t hold it anymore. I quickly took it out of the warehouse and stored the winter glass water I had previously stored.

I took some photos and shared with you how to add glass water to s90. Old drivers can skip it now, and novice drivers can refer to it.

First of all, glass water must be prepared in winter. Depending on the local temperature, I usually buy minus 30, which is enough.

The two key points in adding glass water are to master how to open the front cover, and the other is to find the opening for adding glass water correctly.

The switch on the hood is on the left side of the pedal in the driver’s seat and has a black clasp. You can open it hard.

Then the cover opens a gap, and there is a buckle on the right side of the gap. Just break it off.

Black buckle

Yellow buckle

Then find the place to add glass water. There is a blue cover on the upper right of the cover. Be sure to find the right place. The upper left corner is the location of the antifreeze, and the glass water is the blue cover.