In daily driving, small car scratches are inevitable, and small storefronts are afraid of unprofessional color difference. If you go to 4s shop, it is easy to spray paint on sheet metal, and the high price will inevitably destroy the original paint. Is there a solution that saves time, effort and money without damaging the original car paint? Of course, it is non-destructive repair, which is cheap and can protect the original car paint to the maximum extent. As long as the paint is not seriously damaged, in most cases it can be repaired by today’s technology, which introduces you to non-destructive repair by repairing the depression in the rear door on the right side of the Maybach.
When it comes to Maybach, the old rule is to talk about cars. Since 1921, Maybach, as a German ultra-luxury car brand, is very active in Europe. In 1941, the car company named “luxury” was forced to stop production because of World War II. After half a century of silence, finally in 1997, DaimlerChrysler Group displayed an ultra-luxury four-door concept car under the name “Maybach” at the Tokyo Auto Show, which officially revived the German car brand after years of disappearance, and laid a solid foundation for the launch of the 2019 Mercedes-Maybach S450 4MATIC model at the 2018 Chengdu International Auto Show.
This is also the protagonist of our case today. The car owner also had a bump soon after he bought it. He went to the S4 store to give the maintenance plan sheet metal spray painting. Let’s take the construction of sheet metal, regardless of the price. Sheet metal must destroy the galvanized coating outside. If the heating process is still used in the sheet metal process, then the metal material will be annealed, and the metal strength and hardness will decrease. If the damaged area of the vehicle can only be repaired by sheet metal, there is no way to avoid it, but if it is a small bump, it will be a mountain out of a molehill. And after the sheet metal must be painted, will have an impact on the value of the vehicle, because your car is no longer the original paint, re-painting, in any case can not achieve the effect of the original factory.
Without saying much, go straight to the maintenance steps and use the refractor to find out the areas that need to be repaired.
The trace of the depression in the car to the shop (it is clear at a glance after the color is adjusted)
The non-destructive repair of the depression is based on the optical, physical and mechanical methods, and the location and degree of the depression are judged by the visual effect of the refraction of light on the automobile surface.
Because the damaged place is in the rear door, the glass elevator door plate needs to be removed in advance to facilitate construction.
Connect the door to the car, so that the door does not have too much room for movement, which is also convenient for construction.
Next is the time to make use of the mechanics, massage the “skin” inside the car body through the lever principle to gradually release the tension of the car body depression, so that the surface “entropy” value of the car body depression reaches the maximum, so that the depression can be restored to its original state, and the car body depression can be repaired quickly, accurately and completely.
Then the lamp is placed in different directions to illuminate the sunken position and repaired one by one.
The principle is something like this.
Finally, check the effect of the repair, facing the light or the sun, do not see the defect is considered a successful repair.
Think it’s over? Then you’re thinking too much!
The car paint is already very fragile, so I brought the new car to the store and pasted a layer of car clothes for my car. If it wasn’t for the car clothes protection paint, it must have been damaged in this bump. This time, the previous car clothes were removed, so we should paste a new car clothes for him. (the car and clothing are dragon film G2)
The car and clothing are the construction steps, so we don’t have to explain too much.
Paste the double silver film, and it’s over!
After the completion of the look, without leaving a trace, the paint continued to change his luster, and the Maybach regained his noble breath.
Whether from the straight waterfall front grille or the special hub shape, it can be easily distinguished from the ordinary S-class. However, the new car does not use two-color body painting, but uses the most common black painting, but in order to increase the sense of visual impact, the owner pasted double silver, this kind of double color body, which is only common on the nearly two luxury car tycoons Rolls-Royce and Bentley, the general model is indeed very difficult to drive, but the silver-and-black double-color body on the Maybach S450 has the shadow of the classic Maybach. With a large number of chromium plating decoration, the aura is still very stable.
Today’s lossless repair is over, and finally, it is necessary to summarize the various minefields repaired and under what circumstances are suitable for lossless repair. Non-destructive repair, also known as paint-free car depression repair, paint-free car depression repair is to repair various pits, depressions and depressions on the body surface caused by external factors, this technology is without destroying the original car paint, the use of a series of special tools and repairers to restore the car body depression quickly and conveniently, 0 but for the serious leakage primer damage caused by the accident. It is not recommended to use this method to repair, because not any bump damage can be completed through non-destructive repair, or according to the actual situation to develop a plan to repair.
BennettForster 
1 
September 9, 2024 
