[70] Illuminate the road home

  10
 September 11, 2024
My beloved car, the 14-year-old Arize 7, has run more than 60, 000 kilometers so far, and 20% in the mainland of northwest Inner Mongolia.The current condition of the car is good, and there is nothing unusual like you said.
Over the past few years, in addition to normal maintenance, we have also changed a set of tires, batteries and HID lighting kits. Among these accessories, I think the most expensive is this light bulb. Four sets of lights have been changed before and after, and four sets of money is enough to change the price of one set of lamps.Too bad I didn’t change.
Some time ago, the light broke again, and the stabilizer did not work, causing the light bulb to burn black, but only on the last one, thinking that there must be a difference between the new lamp and the old lamp, so let’s just put on two and leave the old lamp for backup.

The situation of automobile lighting market is the coexistence of halogen lamps, HID xenon lights and LED lights, which is similar to the trend of “three Kingdoms” in the ancient three Kingdoms period. Lighting has long been listed as a major item of automobile safety in foreign countries. according to the proportion of traffic accidents, lighting accounts for a lot of factors.
The performance of the light bulb directly affects the light and shade effect of night lighting and is related to the safety of driving. The life of the inferior light bulb is short, the brightness is insufficient, the focus is not focused, and the range is close. When overtaking, it will make the driver have the illusion of vision and be prone to accidents. In addition, poor-quality lamps and lanterns due to lax sealing, rainy days or car washing when easy to enter the water, will make the lamp produce fog, serious will cause short circuit, fire. Therefore, when the headlamp is modified by itself or the damage needs to be replaced, do not consider the inferior bulb.
So, I choose a light bulb is also one in a hundred, big brands do not consider, the price is expensive, understandable, good advertising. Our domestic car is equipped with domestic products, and I know Shifu for domestic products.
HID xenon light has long distance and high brightness, so it is suitable for seeing dark roads at night. It can effectively improve the safety of driving at night and reduce the difficulty of driving at night. At present, it is widely used in high-end vehicles as high-beam lights. For the xenon lamp modified in the later stage, it is strongly recommended to install a lens. If there is no green isolation belt in the middle of the urban road, do not turn on the high beam light. As it happens, Ai Qiyuan car has its own lens.

The workmanship of domestic light bulbs is not worse than that of imported ones, but more meticulous than those made in China.
Stabilizer, large aluminum fuselage, fast heat dissipation, not easy to burn the motherboard, will not damage the light bulb
The light bulb has a brightness of 5500K, which is the exclusive recipe of stone.
When installing the xenon headlamp, after the power is turned on, the high voltage pulse of the low voltage (12V) automobile power up to more than 20,000 volts in an instant activates the xenon in the xenon bulb to produce a color temperature of 3000-12000K in the arc, thus activating the lighting of the xenon lamp.
Stone stone to control the color temperature at 5500 brightness, this chromaticity is yellow with white is not very dazzling kind, the penetration is normal.
To put it simply, the stabilizer is mainly responsible for the normal lighting of the xenon lamp, and the xenon lamp cannot be lit normally without the stabilizer, let alone work properly, so the quality of the stabilizer determines whether the car owners refit the xenon lamp successfully or not.
The stabilizer starts in seconds, that is, on and on, and all-aluminum is so awesome.
All right, let’s stop eating practical information and get to work.
Open the back cover and get the waste lamp.
Peel off the back cover, you can see the original car socket, black is negative and red is positive, remember the location, and then pull the wire.
Unplug the wire holder, pick up the lamp and turn on the bullets of the lamp holder.
Then you can take out the light bulb and look at the blackness of the lamp.
Finally, remove the stabilizer clip and remove the light bulb.